kimllier 10 LB Spool ER308L MIG Stainless Steel Welding Wire 0.035 Inch (0.9mm) Low Spatter All-Position Gas Welding

10 LB Spool ER308L MIG Stainless Steel Welding Wire 0.035 Inch (0.9mm) Low Spatter All-Position Gas WeldingSpecification:Wire Diameter: 0.035 inch (0.9mm)AWS Specification: AWS A5.9/A5.9M:2006Center Hole Diameter: 2 inchWeight: 10 lbsRequired shielding gas is CO2Typical Wire Chemistry:C 0.08Cr 19.5 - 22.0Ni 9.0 - 11.0Mo 0.75Mn 1.0 - 2.5Si 0.30 - 0.65P 0.03S 0.03Cu 0.75Note:Gas produced during operation can be harmful to your health, arc rays can damage eyes and burn skin, and proper eye, ear, and body protection must be worn when usingWarning:This product can expose vou to chemicals induding lead which is known to the State of Califomia to cause cancer and birth defects or other reproductive harm.For more information go to www.P65Wamings.ca.gov.

• ER308L
• ER308L Classification: Matches 304/304L stainless steel with low carbon content to help minimize carbide formation.
• 0.035 Inch (0.9mm) Diameter: Works for all-position welding (flat, horizontal, vertical, overhead), lap welds, and multipass welds.
• Low Spatter and Minimal Porosity: Reduces cleanup time and waste.
• Gas-Shielded Welding Compatible: Pairs with argon-based shielding gases (e.g., C2 or 98% Ar + 2% CO₂).
• 10-Pound Spool: Sufficient for extended projects.