Liberon WDPWH500 500ml Palette Wood Dye - White

Preparation: Assure the surface is thoroughly sanded, dry, bare and free from dust. Application: Shake well before use. If more than one tin of dye is required to complete the work, mix the tins of dye together to ensure a uniform colour. Apply the Palette Wood Dye fairly quickly along the grain using a foam applicator or brush. Wipe off excess with a clean, dry, cotton cloth before it dries to even out the colour. On large surfaces such as floors avoid overlap marks by working a small section at a time. A second coat may be applied after 2 hours if a stronger colour is required. More than two coats of dye may affect the final finish. Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end result. Different types of wood produce different results. The colour bar may not be a true representation of the actual colour. Precautions: - Do not mix a water-based dye with a spirit-based dye. - Wear gloves to avoid staining skin. - Caution must be taken when using water-based finishes over Liberon Palette Wood Dye. Keep brush strokes to a minimum as over brushing may lift out the colour.

• Ideal or dying all interior bare woodwork, while enhancing the natural beauty of the woodgrain
• Designed to be used prior to oil, wax, varnish or French polish finishes
• Achieves a uniform finish on furniture including doors, cupboards and frames
• Water-based, for interior soft and hardwoods; colors are intermixable
• Dries in 2 hours; 500ml covers approximately 64 square feet