72531-VH7-000 & 72511-VL0-S00 Mulching Blades Kit for Honda HRX217, Complete Tune-Up Kit with 2 Air Filters 17211-ZL8-023, Spark Plug, Bolts, Washer & Socket Tool

Your All-in-One Solution for Honda HRX217 Maintenance Tackle your Honda HRX217's seasonal tune-up with confidence and convenience. This HYMAOTOUS Complete Tune-Up Kit consolidates seven essential maintenance components into one package, specifically curated for the Honda HRX217 series. Forget the hassle of sourcing blades, filters, and hardware from multiple sellers. Our kit delivers precisely what you need for a thorough service: the cutting performance of new mulching blades, the engine protection of fresh air filters, and the reliable start of a new spark plug—all matched with the correct installation hardware. Precision Compatibility for Your HRX217 To guarantee a correct fit and avoid the frustration of wrong parts, this kit is designed exclusively for Honda HRX217 walk-behind mowers. It is a direct replacement for the following models: Honda HRX217 Honda HRX217K1 Honda HRX217K2 Honda HRX217K3 Honda HRX217K4 Honda HRX217K5 Honda HRX217K6 Important:​ We recommend verifying your mower's model number and serial number (often found on a label under the seat or on the deck) before ordering. Compatible mowers typically have serial numbers in the range of MAGA-1000001 to MAGA-2199999. Kit Contents & Technical Specifications Mulching Blades (2): Upper Blade (72531-VH7-000):​ 20.8" Length x 1.0" Width. 3/32" Center Hole. Lower Blade (72511-VL0-S00):​ 20.75" Length x 3.375" Width. 13/16" Center Hole. Material & Finish:​ Fabricated from SAE 1045 medium carbon steel with a protective zinc-phosphate coating to resist corrosion. The cutting edges are laser-sharpened at the factory. Air Filters (2) - Part # 17211-ZL8-023:​ Dual-layer pleated paper design for efficient dust and debris filtration, helping to protect your mower's GCV200 engine. Spark Plug (1):​ A standard replacement plug to ensure consistent ignition. Installation Hardware:​ 2x M10 x 25mm Hex Bolts and 2x 10mm Washers. These are the correct size and thread pitch for securing the blades to your HRX217's spindle. Spark Plug Socket Tool (1):​ The proper size deep-well socket for easy and safe spark plug removal and installation. Why Choose This Complete Kit? Convenience:​ One purchase covers multiple service items. No more separate orders for blades, filters, or hardware. Assured Compatibility:​ Every component is selected to match the OEM specifications for the HRX217 series, eliminating the risk of receiving incorrect parts. Cost-Effective:​ Bundling these items together often provides better value compared to purchasing each component individually from different sources. Ready for the Season:​ Get your mower back to peak performance with a fresh cut and a well-tuned engine in one afternoon. Simple Installation Steps Safety First:​ Disconnect the spark plug wire to prevent any accidental engine start. Access the Deck:​ Tip the mower on its side, ensuring the air filter and carburetor are facing upward to prevent oil leakage. Replace Blades:​ Use a 14mm socket or wrench (not included) to remove the old blade bolts. Install the new blades with the cutting edge facing the ground and the curved "wings" pointing downward toward the deck. Tighten the new M10x25mm bolts securely in a crisscross pattern. Service Air Filter & Spark Plug:​ Open the air filter cover, replace the old filter(s) with the new ones. Use the included socket to remove the old spark plug, check the gap if necessary, and install the new one hand-tight plus a slight turn. Final Check:​ Reconnect the spark plug wire. Start the engine and listen for smooth operation. Package Includes: 1 x Upper Mulching Blade (72531-VH7-000) 1 x Lower Mulching Blade (72511-VL0-S00) 2 x Air Filter (17211-ZL8-023) 1 x Spark Plug 2 x M10 x 25mm Hex Bolt 2 x 10mm Washer 1 x Spark Plug Socket Tool

• Complete 7-in-1 Tune-Up Kit for Honda HRX217: This all-inclusive mulching blades kit provides everything needed for a major service, including two factory-spec blades (72531-VH7-000 & 72511-VL0-S00), two high-flow air filters (17211-ZL8-023), one spark plug, two M10x25mm hex bolts, two 10mm washers, and one spark plug socket tool
• Exact Fit for HRX217 Series Walk-Behind Mowers: Engineered specifically for Honda HRX217 models including HRX217, HRX217K1, K2, K3, K4, K5, and K6 with serial numbers typically ranging from MAGA-1000001 to MAGA-2199999, please verify your mower's model and serial number before purchase
• Precision Blades with Safety Coating for Optimal Cut: The upper mulching blade (72531-VH7-000) measures 20.8" long x 1" wide with a 3/32" center hole, and the lower blade (72511-VL0-S00) is 20.75" long x 3.375" wide with a 13/16" center hole, both feature a factory-applied edge coating for safe handling that wears off during initial use
• Enhanced Engine Performance Package: Beyond just replacement blades, this mower blade set includes two pleated air filters to maintain optimal airflow and a new spark plug for reliable ignition, addressing common performance issues like hard starting and reduced power in one convenient kit
• Ready-to-Install Kit Saves Time and Ensures Compatibility: All necessary hardware (M10x25mm bolts, 10mm washers) and a dedicated spark plug socket are included, ensuring you have the correct parts for a straightforward installation without multiple purchases or compatibility guesswork