Transmission Slip Yoke 3-3-2431X with 5-460X U-Joint Kit

Ovabeyna Transmission Slip Yoke 3-3-2431X with 5-460X U-Joint Kit Fitment： Compatible with U Joint：Compatible with 3-3-2431X with 5-460X U-Joint Kit Compatible with Neapco N3-3-2431X Trans Slip Yoke with counter bore Compatible with PTI 3503-326 Slip Yoke Compatible with PTI 3503-324 Slip Yoke Bolt on uses Strap Kit Compatible with Sonnax T3-3-2431CBHP Trans Slip Yoke with counter bore Compatible with Sonnax T3-3-2431CBH Trans Slip Yoke with counter bore for roller bearing tail housings Notes： If you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission If your transmission has an o-ring you will need a 5.5” short barrel counter bored slip yoke.

• Replace the OEM number: 3-3-2431X with 5-460X
• Specification: 3-3-2431X Slip Yoke 31 Based on 32 Spline; Outside Yoke Dimension (E) In.3.875; Bearing Cap Diameter (D) In.1.188; To End Of Spline (J) In.5.500; Hub Diameter (R) In.1.885
• Specification: Bearing Cap Diameter (1): 1.062 inches / Bearing Cap Diameter (2): 1.188 inches; Bearing Cap to Bearing Cap (1): 3.219 inches / Bearing Cap to Bearing Cap (2): 3.625 inches
• Fitment: Compatible with GM TH / Turbo Hydromatic / Turbo 400 / 4l80E & 4L85E, Muncie M21 & M22, Borg Warner Super T10
• NOTES: The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft. It can used on Front or Rear Driveshafts,You can use on a 1350 Series CV Driveshafts or Weld Yoke Style Driveshafts.