FatGecko DMNT-Reach Mount

This mount is intended for use in conjunction with (1) Fat Gecko Dual or Triple Camera Mount and (1) Selfie Stick (each sold separately). Attach your selfie stick to the Fat Gecko Dual or Triple camera mount and support it with this product. 1. Grab the Fat Gecko reach suction cup mount and loosen all adjustment knobs (suction cups, extension tubes, clamps). 2. Keep the suction cup away (at least) from Fat Gecko Dual/Triple mount. 3. Adjust the extension shaft length according to the angle and position of the selfie stick. 4. Open the mouth of the clamp fully and wrap it around the selfie stick. Tighten the clamp until it locks tightly. 5. Press the suction cup firmly on the surface of the installation. Push down the button on the suction cup and pull up the suction cup lever. 6.Once the suction cup is locked into place, tighten the suction cup and extension shaft adjustment knob. 7.Install the camera (max 1.8kg) to the 1/4"-20 head of the selfie stick

• Set Contents: Main unit only
• [Installation] Bottom: Single suction cup (diameter 3.1 inches (80 mm)), Top: Clamp
• Stretch Range: Approx. 15.6 - 22.0 inches (395 - 560 mm) (not including the clamp) (Size and weight may vary slightly depending on the product. Please understand. )
• The weight of the camera is up to 1.8kg (4 lbs)