スプーンフル(Spoonful) Geodesic Windshield Khaki

Inspired by geodesic construction, the bonfire screen is composed of curved surfaces during installation. No tricks required and if you set it up according to the steps, anyone can do the same clean way. It has the same trapezoid outline as a typical bonfire screen, It is not structured with triangular panels on both sides of the rectangle, Constructed of 3 triangle panels. Since there is no corner to fold the fabric at the fulcrum, it is made up of a dome tent, It has a very strong construction. The procedure takes only 4 steps. 1. Peg down 3 parts on the bottom and 1 peg at the back of the center 2. Stand the pole along the seam in a V shape (X-shape for long length) 3. Attach the rope to the top of the pole. 4. Hang rope on the back of the center peg, adjust the balance and add tension The wind tightens to prevent sagging and blowing the wind. This windshield is also easy to reapply when it comes to the wind. The length of the pole is about 27.6 inches (70 cm) that can be placed in a V shape along the seam, but it is often a little longer if used as a sub pole on a tent or tarp. If your pole is long, you can install the pole in an X shape instead of a V shape and you can set it up without issue. Material: 100% cotton domestic No. 10 canvas Dimensions: Upper Width 25.6 inches (65 cm) x Bottom Width 53.1 inches (135 cm) x Height 2

• Bonfire windshield that can be set up easily and cleanly
• 100% cotton (domestic canvas No. 10)
• Windshield Dimensions: Upper Width 25.6 inches (65 cm) x Bottom Width 53.1 inches (135 cm) x Height 23.2 inches (
• High strength windshield with a geodesic dome, like a cut out part