RV Accumulator Tank, 1L Pre Pressurized Pressure Tank 125PSI Internal Bladder, 10-125 PSI Range, Reduces Pump Cycling and Smooths Water for Boat, Marine, RV

Spec: Item Type: Pre Pressurized Accumulator Tank Material: PA Plastic Size: Approx. 30x14.4cm / 11.81x5.67in Volume: 1L (33.8FL.OZ) Charging Pressure: 10PSI/0.7BAR Maximum Operating Pressure: 125PSI/8.6BAR Air Fill Valve: Standard Car Tire Valve Inlet Outlet Diameter: 1/2in MNPT Application: Plays a role in maintaining constant pressure, preventing the system pressure from fluctuating and making the water flowing smoother. 1. for RV Use: It can effectively absorb the excess heat that enters the water system pipes due to the heater, and there will be no poof sound when turning on the faucet 2. for RV Leakages: After long term use, pipe connections may loosen, resulting in drip leakages that cause the to start frequently. The pressure tank can effectively reduce the frequency of startups. 3. During Showering: Improves frequency startups caused by uneven pipes and nozzles, creating a more consistent water flowing. Package List: 1 x Pump Body 2 x Nut Joint 2 x Hose Clamp 1 x PTFE Tape 1 x Instruction Manual How To Use: Direct installation and use

• [HIGH PRESSURE CUSHIONING] By storing peaking line water pressure, our tank protects against damage, reduces noise, and prevents frequent pump activations for a quiet and water supply.
• [WORKING PRINCIPLE] 3. When water is needed, the water in the pressure tank enters the pipes first due to the pressure of the air bladder. The remains off until the pressure in the pressure tank drops below the starting pressure of the at which point the starts working, repeating this cycle.
• [WIDE USAGE] Suitable for rvs, boats, trailers, and yachts, this pre pressurized accumulator tank enhances outdoor travel convenience by ensuring a steady water during your adventures. Consistent pressure, with a pressure range of 10psi to 125psi, our tank suits most rv pumps, offering stable water and reducing pulsations in freshwater systems.
• [EASY ADJUSTMENT] Simply set the tank pressure 3psi below the pump switch using threaded fittings and clamps for secure hose attachment, following the manual for a hassle- setup. Efficient setup, pre charged to 10psi, our tank is suitable for rv, marine, food, and liquid systems, minimizing pump starts and seamlessly integrating with pressurized systems.
• [WORKING PRINCIPLE] 1. The pressure tank is pre charged with pressure before leaving the factory.2. When the is turned on, water enters the pressure tank. When the pressure tank is full, the stops working.