CV Boot Clamp Pliers, Single Ear Hose Drive Shaft CV Axle Boot Clamp&CV Joint Puller Propshaft Separator Tool

CV Boot Clamp Pliers, Single Ear Hose Drive Shaft CV Axle Boot Clamp&CV Joint Puller Propshaft Separator Tool&CV Joint Separator Tool

• PRODUCT SIZE: The jaw opening of the single ear hose clamp pliers can be adjusted freely, the maximum opening length can reach 20mm/0.78inch, by rotating the 13mm/0.5inch screw.
• EASY TO USE: The drive shaft clamping tool is perfectly designed to help you quickly and undamaged remove and install the locking strap on the dust boot. Crimp the clamp, then turn the screw to push the crimp to lock in place. Grease the screw to make it work more smoothly.
• EXCELLENT DESIGN: This CV axle boot clamp tool is perfectly used to closing the locking straps of single ear hose clamps, and it’s specially used to remove and install the locking straps on the automobile dust boot.
• ASY TO USE: The CVJ CV axle removal tool quickly separates the CV Joint from the axle without removing the drive shaft. Overall CV joint tool dimension:9.4"x 5.75"(23.9cm x 14.6cm); Maximum CV joint diameter: 3.7"(95mm).
• ADJUST THE DIAMETER: 0.7-inch (17mm) clamping bar minimum shaft diameter; Works on CV joint shafts with 0.7-inch (17mm) or larger diameters of the groove where the rubber boot is clamped to the shaft; We recommend an 18mm or 19mm minimum shaft diameter to ensure a good bite on the shaft (Requires rings to hold on to; Not designed for use on smooth shafts).