3Pcs 5V 3A BEC/UBEC Voltage Regulator Step Down UBEC Module for RC Car RC Boat RC Models Raspberry Pi RC BiCopter

Features:Item:RC BEC Voltage Regulator UBEC 3A 5V Output: 5V/3A Input: 5.5V-26V (2-6 cells Lipo pack or 5-18 cells NiMH pack) Ripple: <50mVp-p(2A/12V) Demension: 26 x 12 x 11mmSwitching frequency 300khz.Lightweight and Compact.This have a low voltage cutoff to protect the lipo battery from over draining The side with the servo connector is the output and the side with the wires with no connector is the inputVery convenient to integrate with the existing hardware.Electronic devices are protected by shielding, which greatly reduces electromagnetic interference and ensures the normal operation of the receiverApplications:1.Fits for Spektrum Reciever Raspberry Pi RC Cars RC Lysander Plane and Robotics Project 2.It can be used as an alternative power source as to not starve the receiver's power supply of energy3.●Works fine as long as your servos are limited to 1 maybe 2 ave draw or 3 low draw .Package lists:●3Pcs 5V 3A UBECNote: This is not an electrical switch, just an independent UBEC, which cannot be connected to a motor

• Lightweight and compact, easy to install.
• The side with the servo connector is the output and the side with the wires with no connector is the input
• One side has a plug that goes into the receiver. The other side has a positive and negative wire that will need to be spliced of soldered into the battery wires going to the ESC
• Output Voltage: 5V / 3A Input: 5.5V-26V (2-6 cells Li-Po battery pack or 5-15 cells Ni-MH battery pack)
• Size: 43 x 17 x 7mm; Weight: 11g
• With overload/overcurrent/over/low voltage protection function, stable performance.
• RC BEC Voltage Regulator Fits for Spektrum Reciever Raspberry Pi RC Cars RC Robotics and other RC Projects