LZMZMQ Doorway Threshold Strip 1m/1.1m/1.2m/1.3m/1.4m/1.6m/1.7m Long, Floor Transition Strip for Concrete/Stairs/Indoor/Gym, Reducer Flute T Molding(Gold,110cm/43IN)

Are you still troubled by the vinyl floor and tile seam in your life?✔8 major features to satisfy you:❶T mold reducer aluminum surface is anodized to make it waterproof, rust and fade resistant❷Easy to install, no drilling required, no damage to the floor (excluding glass glue)❸Perfectly connects two uneven surfaces & highly similar surfaces❹Matte finish matches your inspired vision for your home or office❺Suitable for various surface joints: Flooring/tile/laminate flooring/wood floor/carpet/vinyl/concrete floor etc.❻Internal exterior use: suitable for deck/ Entry/ above ground pool, and indoor gym/ bathtubs/ ramp/ Walkers Entry/around pool, etc.❼Can also be used on RV, travel trailer, camper or wall/cabinet decoration and as a Robot Vacuum Ramp❽It can be installed on any doorways, room entryways or two different flooring surfaces to cover any gaps that may be visible.✔Tips: The width of the gap that can be filled by the transition strip is only the width of the transition strip itself, and the filling width is not suitable for gaps larger than the width of the transition strip you purchased. Please you must measure the width of the filling gap✔Specification▶Material: metal aluminum▶Installation tool: glass glue▶Size: 50cm/70cm/90cm/100cm/110cm/120cm/130cm/140cm/150cm/160cm19in/27in/35in/39in/43in/47in/51in/55in/59in/63in▶Width: 3.3cm(1.3in)▶Thickness: 1.7mm(0.07in)▶Height: 0.7cm(0.27in)✔Include: 1x T Molding Floor Transition Strips

• ☑[Heavy-Duty Aluminum]T molding floor transition strip is made of aviation metal aluminum. Which can withstand the ground area of large-scale traffic in homes and shopping malls, with a maximum load of 500LBS (250KG), and will not fade
• ☑[Extra Wide Extra Long]19in/27in/35in/39in/43in/47in/51in/55in/59in/63in extra long edge Trim strips/ reducer flute with widths of 3.3cm(1.3in) and height of 0.7cm(0.27in), for caulking two flat flooring & uneven floors trim edge.
• ☑[Highly Similar]Our floor divider strips are only suitable for two surfaces with similar heights. Usually installed to connect tile to tile, laminate to tile, vinyl to vinyl, laminate flooring to vinyl. Low profile design prevents elderly, children, patients from tripping and falling
• ☑[Indoor And Outdoor Use]Edge trim strip design can be applied to home, doorways, kitchen, entrys, bedroom, bathroom doors, floor carpet tile laminate flooring around the pool. And non-slip, waterproof
• ☑[No Drilled/Cuttable]Just measure your gap and cut the length you need, then fill the gap with glass glue, and finally put it into the T-die. No drilling required and no damage to the floor. (without glue)