High Voltage AC110-220V LED Brightness dimmer 3-Button Remote Control Trailing Edge dimmer Suitable for LED Bulbs

Low Voltage TransformersHigh voltage AC90-240V DM014 LED brightness dimmer 3-button remote control trailing edge dimming suitable for LED bulbsfeature:The three-button bidirectional thyristor dimmer uses an advanced computer control chip and a high-voltage MOS tube as the control circuit to achieve trailing edge dimming. It is used to control various lamps connected to the thyristor power supply, and can also be connected to high-voltage LED load lamps; it has many advantages such as easy connection and easy use. The dimming function can be realized according to the actual needs of customers.Technical Parameters:Working temperature: -20℃-60℃Power supply voltage: AC 90~240V (50~60Hz)Output: 1 channelTransmitting and receiving frequency: 433.92MhzOverall dimensions: L104×W68×H30mmRemote control size: L119.7×W43.2×H16.4mmPacking size: L122×W45×H132mmNet weight: 150gGross weight: 205 grams<;1W<;1A<;110W, 240V: 240WDimming method: trailing edge dimmingRemote control distance: less than 20mDimensionsInterface Description1: Output, thyristor dimming signal output interface, output voltage 90~240VAC, 50~60Hz, maximum output current 1A;2: Input, power input interface, input voltage range is 90~240VAC, 50~60Hz;3: Matching, remote control matching code key. This controller can be equipped with 2 remote controls for joint control. Use a sharp non-conductive object to press the code matching button on the controller, and at the same time press and hold the on/off button on the controller for more than 3 seconds to complete the code matching. After the code matching is successful, the load light will flash. When matching the first remote control, the load light will flash 3 times. When matching the second remote control, the load light will flash 6 times. After that, each code pairing will replace the previous coded remote control.4: Power red light. When the controller is powered normally, the red power indicator light is always on;5: The green signal light is on. When the controller is processing the remote control signal, the green signal light flashes;InstructionsThe remote control has 3 buttons with the following functions:typical applicationPackage Included:1 piece 3-button LED dimmer with remote control (batteries not included)

• Low Voltage Transformers