ADE RD3-015 PRO Shake Awake Red Dot + Optic Mounting Plate for Ruger Security 380

Comes with a ADE RD3-015 PRO Red Dot, a mounting plate for RUGER Security 380 and also a standard picatinny mount. Attention! This Ruger Security 380 optic plate does NOT fit Ruger Security 9 and SR9.

• Comes with a ADE RD3-015 PRO Red Dot, a mounting plate for RUGER Security 380 and also a standard picatinny mount. Attention! This Ruger Security 380 optic plate does NOT fit Ruger Security 9 and SR9.
• The ADE Zantitium PRO(D3-015PRO) has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.
• The ADE Zantitium PRO has Multi Reticle System. The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
• The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25" Length x 1.4" Width x 1.27" Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.
• The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sight(will keep the rear sight to co-witness the red dot), such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slide(not in the pre-cut).