(Ship From USA) 5 Mil Menu Laminating Pouches Qty 100 Hot 12 x 18 Laminator Sleeves / 12' x 18' thermal laminating pockets with standard 1/8' radius rounded corners,5 mils per flap adds a total of 10

12” x 18” x 5 mil (per side) heat activated thermal laminating pouches are high clarity after adhesive is heat activated and are commonly referred to as Large Menu, Double Letter and Tabloid/ledger size. The clear glossy finish protects and enhances colors. 5 mil thickness is one of the more popular medium weight laminating pouches for rigidity, protection and compatible with nearly every thermal pouch laminator on the market. Note: Industry standard specification for 5 mil laminating pouches is 5 mil on each flap for a total of 10 mil added to your paper sheet card. 1 mil equals 1/1000th of an inch (metric: 25 microns). The industry calls these pouches, yet they are sealed on only one edge instead of three (like a folder, but with 3/32” flat seal for the fold). FEATURES: These laminates are compatible with all thermal pouch laminators capable of sealing 12” x 18” x 5 mil (per side) lamination sheets (metric size: 305mm x 457mm x 125 micron thick x 2 flaps adds 250 microns thickness to your sheet). Durable high gloss finish makes colors pop, drawing attention to your printed information. Small Pre-Rounded Corners for a Smooth Professional Finish, approximately 1/8” radius (3mm) Maximum insert sheet size Recommended: up to 11-3/4” x 17-3/4” (299mm x 451mm) providing a 1/8” (3mm) sealed edge border protecting your sheet. Clear polyester plastic with Heat Activated EVA adhesive ConstructionTYPICAL APPLICATIONS:Laminating Large Menus, Double Letter, 11 x 17 or Tabloid Size Sheets Placemats Signs Arts & Crafts Paper Sheets requiring extra handlingTips:When trying any brand for the 1st time, consider running at a slightly lower temperature (or faster speed). If the results are cloudy, you can always run the sheet again at a higher temperature or slower speed, but you cannot fix heat blisters caused by running too hot or too slow. If planning on trimming or hole punching laminated sheets, wait 24 to 72 hours for maximum adhesive curing time and a professional cut edge.

• Pack of 100 heat activated thermal Laminating Pouches sealed on one 12” edge, includes at least 1 reusable laminating carrier silicone coated on the inside surface, for those laminators that require them
• 2 Durable 5 mil polyester plastic sides including heat activated adhesive which becomes clear when heat and even pressure is applied (laminator recommended)
• Maximum insert sheet size Recommended: up through 11-3/4” x 17-3/4” (299mm x 451mm) providing a 1/8” (3mm) sealed edge border protecting your sheet
• Small Pre-Rounded Corners for a Smooth Professional Finish, approximately 1/8” radius (3mm)
• Metric Pouch size: 305mm x 457mm x 125 microns (x 2 sides = 250 microns total thickness added to your sheet)