Hand-Push Cement Ground Grinder Floor Grinding Polisher Floor Polishing Machine with 9pcs Grinding Heads 40L Dust Bucket for Old Ground Restore 220V

Parameter:Grinding Width: 500mmMotor Speed: 1430r/minVoltage: 220VPower: 7.5kwPhase Number:1Fan Power: 0.75kwMaximum Airflow: 180mm³/hDust Loading Capacity: 40LPrecautions for use:1.The input voltage should not be too low.2.When using, first lift the machine head off the ground, and then turn on the switch. When the machine head rotates normally, gently place it on the ground.3.When working, the machine head swings left and right, then moves forward, and cannot stop in place.4.In case of power failure during operation, the switch should be reset and cannot be stopped at the original position to avoid burning the motor when the power is on.Note:Give away 5 meters of wires. The maximum length of the wire connected to the machine can be 90 meters. The specification is three-core wires. Each wire should not be less than 6 mm² of pure copper wire. The wire must be connected to the air switch, and the rated current of the air switch is about 63A. As shown in the picture of wiring mode, please contact us if you have any questions.

• Parameter: Voltage: 220V; Power: 7.5kw; Fan Power: 0.75kw; Number Of Grinding Heads:9pcs; Grinding Width: 500mm; Max Airflow: 180mm³/h; Working Speed: 1430r/min; Dust Loading Capacity: 40L; Phase Number:1
• Multi-Functional Grinding Capabilities: Interchangeable grinding heads allow for various applications including grinding, polishing, rust removal, and paint removal. The wear-resistant diamond chassis ensures long-lasting performance for heavy-duty concrete grinding, hardening, and surface preparation
• Dust-free Operation: Equipped with dual suction fans, 40L dust collection box, and included PVC dust cover for virtually dust-free operation. The 180mm³/h airflow capacity and replaceable filter elements maintain clean air while working, with optional water pipe connection for enhanced dust suppression (please turn off the fun before connecting the water pipe)
• Enduring and Relicable: Widened rubber damping casters ensure polishing smooth operation and long service life. 40L large capacity dust bucket, dust filled should be cleaned in time
• Note: Give away 5 meters of wires. The maximum length of the wire connected to the machine can be 90 meters. The specification is three-core wires. Each wire should not be less than 6 mm² of pure copper wire. The wire must be connected to the air switch(circuit breaker), and the rated current of the air switch is about 63A