Electric Polishing Machines Air Polisher Side Exhaust Dry Wet Use M14 5/8-11 Thread Pneumatic Air Wet Grinder Polishing Tool Stone Car Polisher for Scratch Removal car

Air Polisher Side Exhaust Dry Wet Use M14 or 5/8-11 Thread Pneumatic Air Wet Grinder Polishing Tool Stone Car Polisher Name: M14 or 5/8-11 Thread Pneumatic Tool Air Wet Grinder can be powered by compressed air. Description: Compressed air should be dry and cool, as high-moisture air will lead to internal rusting that could cause machine failure. the air pressure should normally be maintained at 90PSI~116PSI(0.62MPa~0.8MPa). Always supply adequate water during operation. To avoid machinery failure during operation, make sure the machine is filled with 10# oil before operation. When grinder will stop working, especially if it will be not used for a period of time, the machine should be well oiled and rotate for almost five seconds without loading before off it, this is a supper important step to avoid rusting With durable and lightweight, provincial wind, ultra-quiet, super horsepower, quick and easy operation Package : 1 x Pneumatic Tool Air Wet Grinder Thread M14 OR 5-8-11 1 x 4 inch Aluminium Backer Pad ( polihsing pads are no included)

• Compressed air should be dry and cool, as high-moisture air will lead to internal rusting that could cause machine failure.
• the air pressure should normally be maintained at 90PSI~116PSI(0.62MPa~0.8MPa).
• Always supply adequate water during operation.
• To avoid machinery failure during operation, make sure the machine is filled with 10# oil before operation.
• When grinder will stop working, especially if it will be not used for a period of time, the machine should be well oiled and rotate for almost five seconds without loading before off it, this is a supper important step to avoid rusting