Vibration Damper Holding Tool Kit T10531 for VW Audi Skoda EA888 Engine 1.8L 2.0L TSI TFSI, Crankshaft Pulley Removal Tool Set with Portable Case, OEM T10531/1 T10531/2 T10531/3 T10531/4

DescriptionOur vibration damper holding tool kit is an excellent tool for maintaining the engine timing when removing&installing the vibration damper pulley which includes complete accessories and can accelerate work efficiency and reduce labor intensity. This tool kit features high quality and exquisite workmanship, making it firm and long-lasting. You can easily carry and store them in the portable case for use outside.ApplicationThis product fits for VW 4cyl 1.8L 2.0L 4V TFSI EA888 engines, Skoda, Audi, and Seat. The OEM part number is T10531(T10531/1 Counterhold Tool, T10531/2 – Tensioning Pins, T10531/3 – Turning-over Tool, T10531/4 – Knurled Nut).How to Operate1.Unscrew two fastening bolts of the timing chain cover. The bolts must be replaced. 2.Install the bracket onto the belt pulley, tighten the knurled nut, and completely unscrew the belt pulley bolt.3.Check whether the turning-over tool can slide easily on the clamping piece. If necessary, tighten the bolt.4.Screw the tensioning pin T10531/2 into the crankshaft and tighten it with a 12mm open-ended wrench(not included).5.Tighten the tension bolts by hand. This will lock the sprocket in position relative to the crankshaft. 6.Unscrew the knurled nut. Remove counterhold tool T10531/1 and belt pulley. 7.Screw the crankshaft without the belt pulley to install the turning-over tool onto the tensioning pin. At the top dead center position, the tool plane is upward. Use flange nuts to hold the turning-over tool. 8.Screw the crankshaft through the hexagon nut. 9.If necessary, remove the flange nut and turning-over tool from the tensioning pin. Lubricate the sealing lip of the radial oil seal with engine oil. 10.Install the belt pulley to the top-dead-center position. When doing so, pay attention to the bite of the sprocket. 11.Install the turning-over tool onto the tensioning pin. Screw on the flange nut and move the pulley back and forth slightly to ensure correct engagement. Tighten the nut until the belt pulley cannot be screwed again. 12. Install the bracket onto the belt pulley, and then tighten the knurled nut by hand. 13. Unscrew the nut and loosen the tensioning pin. Unscrew the tensioning pin and remove it with the counterhold tool. 14. Screw in the new pulley bolt with the lubricated O-ring by hand. 15. Unscrew the knurled nut, and then remove the counterhold tool T110531/1. 16. Tighten the pulley bolt. SpecificationsOEM Part Number: T10531Condition: NewStyle: ModernType: Vibration Damper Holding ToolColor: Silver, Black, BlueMaterial: SteelProcess: Galvanization, Black Oxide FinishSpecial Feature: DurableThread: M16×1.5Counterhold Tool Size: 30*10.5cm/11.8*4.13inchLarge Inner Diameter: 5.2cm/2.04inchSmall Inner Diameter: 1.2cm/0.47inchPackage Size: 31.5*17.5*8cm/12.4*6.89*3.15inchGross Weight: 2kg/4.4 lbsPackage Included1* T10531/1 Counterhold Tool2* T10531/2 Tensioning Pins1* T10531/3 Turning-over Tool1* T10531/4 Knurled Nut1* Portable CaseNotesPlease use this product correctly to avoid damage. Please do not tum the tensioning boll further, otherwise, the Tensioning Pins- T10531/2- become jammed when installing the crankshaft.

• ⚡ 【PROFESSIONAL ENGINE COMPATIBILITY】Specifically designed for VW/Audi Group EA888 engines including 1.8L and 2.0L TSI/TFSI variants. Compatible with engine codes: BZB, CDAA, BPU, BYT, CABA, CABB, CDHA, CDHB (1.8L); CAWB, CCZA, CBFA, CCTA, CDNB (2.0L); DLVB (35 TFSI MHEV); DEMA, DKYA, DLVA (40 TFSI MHEV); DKZA, DKZB, DKZC (40 TFSI). Ensures perfect timing chain sprocket fixation during damper service
• ⚡ 【INDUSTRIAL-GRADE CONSTRUCTION】Crafted from premium steel with galvanization and black oxide finish, providing exceptional hardness, strength, and rust resistance. The M16×1.5 thread specification and precision machining ensure perfect fitment and long-lasting durability. Resists deformation and breakage even under heavy-duty professional use
• ⚡ 【COMPLETE PORTABLE KIT】Includes all OEM-specified components: T10531/1 Counterhold Tool, T10531/2 Tensioning Pins (2 pieces), T10531/3 Turning-over Tool, and T10531/4 Knurled Nut. Housed in a sturdy blue portable case with embedded handle and protective grooves for easy transportation and secure storage
• ⚡ 【TIME AND COST EFFICIENT】Enables precise timing maintenance during vibration damper pulley removal and installation, significantly reducing labor time and intensity. Allows professional-level repairs without dealership visits, saving substantial repair costs while ensuring factory-quality results
• ⚡ 【EXPERT INSTALLATION GUIDANCE】Includes detailed operational instructions for proper usage. Features large inner diameter (5.2cm/2.04inch) and small inner diameter (1.2cm/0.47inch) for various applications. Smooth surface finish allows easy cleaning with a wet cloth. Professional installation recommended for optimal results