Genset Controller Model DSE704 Generator Monitor Unit Electronic Programmer Panel Board Genset Parts Circuit Charge Controller

Electronic Engine ControlGenset controller 704 generator controllerThe 704 is an Auto Mains Failure ControlModule that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor engine temperature, low oil pressure, fail to start, charge failure, over speed and under speed.When the module detects a fault condition it automatically shuts down the engine. The module alsoincludes two user configurable auxiliary inputsMain featuresKEY FEATURESAutomatic mains (utility) supply monitoringAutomatic shutdown when fault conditions are detectedManual startEngine pre-heatEngine monitoring and protection featuresProtected Solid State (PSS) outputsFront panel mountingFront panel programmingTamper proof engine hours counterRemote startLED indicatorsConfigurable timersConfigurable outputsSingle/three phase mains sensingKEY BENEFITSTransfers between mains (utility) and generator powerOn-site module configuration to match user requirementsHours counter provides accurate information for monitoring maintenance and warranty periodsMultiple engine parameters are monitored simultaneouslySpecification SUPPLYCONTINUOUS VOLTAGE RATING8V to 35V continuousCRANKING DROPOUTSAble to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without theneed for internal batteries.MAXIMUM OPERATING CURRENT50mATYPICAL CURRENT12mACHARGE FAIL8 Volt Charge Fail at 12 Volts16 Volt Charge Fail at 24 VoltsINPUTSALTERNATOR INPUT RANGE75V(L-N) to 333V AC (L-N) absolute maximumALTERNATOR INPUT FREQUENCY50Hz 60Hz at rated engine speed(minimum:75V AC L-N) (Crank Disconnect from15V L-N @ 20Hz) Overspeed +14% (+24%overshoot) Underspeed -20%OUTPUTSSTART & FUEL OUTPUTS12 Amp at supply voltage Switches to battery negative when activeAUXILIARY OUTPUTS1.2 Amp at supply voltage. Switches to battery negative when activeDIMENSIONSOVERALL165 mm x 125 mm x 29 mm6.5" x 4.9" x 1.2"CUT-OUT149 mm X 109 mm5.9" x 4.3"

• Electronic Engine Control
• Genset Controller Model DSE704 Generator Monitor Unit Electronic Programmer Panel Board Genset Parts Circuit Charge Controller