Handheld Infrared Car Paint Lamp 2kw/110V/220V Infrared Paint Curing Lamp, Portable Body Repair Paint System Infrared Heater Paint Dryer Infrared Lamp. (Car Paint Lamp 2kw 320 * 140 * 195)

Car Paint Equipment Paint Lamp ✅ 1. Protection: The Car Paint System Is Equipped With A Shock Absorber On The Front Light. And High-Intensity Reflectors. Not Only Is The Beam Denser, But It Can Effectively Block Heat And Dissipate Heat. There Is Also A Stainless Steel Protective Mesh To Prevent Burns From Accidental Contact. ✅ 2. Lifting Stand: Select The Strap To Install A Detachable Stand, And The Tripod Can Be Retracted In Three Parts. The Bracket Can Reach 165cm. And The Whole Fuselage Is Steel Structure. Very Stable And Durable. ✅ 3. Protect The Paint Surface: The Fibers Are Soft And Have Strong Penetrating Power, And Will Not Overheat, Causing The Paint Surface To Dry And Crack. ✅ 4. Longer Service Life: Under The Premise Of Normal Operation Of The Lamp, The Service Life Can Reach 10,000 Hours. ✅ 5. Widely Used: Infrared Curing Lamps Are Widely Used In Car Spray Booths, Local Paint Drying, Putty Drying, Car Spraying And Baking Booths, Etc. Product Details: ★ Voltage: 110v/220v 50hz ★ Power: 2000w ★ Curing Area: 350* 400mm ★ Time Range: 1~90 Minutes ★ Tube Length: 330mm ★ Working Temperature: 30-100°C ★ Product Material: Aluminum Alloy ★ Net Weight: 2 Kg Note: 💚 1: Try To Avoid Human Body Exposure To Infrared Light, Avoid High Temperature Burns Or Allergy To Infrared Light, Etc. 💚 2: Since The Paint Lamp Is Relatively Small, It Is Suitable For Curing And Heating In A Relatively Small Area. If Used In A Large Area, The Curing Heating Effect May Be Reduced And The Curing Heating Time Will Be Longer. 💚 3: When The Working Temperature Is Too High, Try Not To Let Anything Around The Lacquer Lamp, Because It Will Cause Poor Air Circulation Or Poor Heat Dissipation.

• 💡 [Light And Portable] Hand-Held Car Paint Lamp, The Whole Body Is Made Of Aluminum Alloy, The Handle Is Ergonomically Designed, And The Whole Machine Weighs About 2kg, Which Is Very Labor-Saving.
• 💡 【Curing Area】The Infrared Heating Paint Lamp Can Cure 350×400mm, And The Working Temperature Can Reach 30-100°C (86-212°F). The Continuous Working Time Can Reach More Than 60 Minutes, And The Automobile Paint Lamp Tube Adopts Quartz Halogen Lamp. The Service Life Can Be Up To 10,000 Hours.
• 💡 【Infrared Short Wave】Infrared Paint Lamp Adopts Infrared Short Wave Radiation Heating Technology, Infrared Is Especially Suitable For Drying And Curing Of Paint, Because These Waves Can Penetrate The Surface And Heat From The Inside To The Outside, So The Heating Speed Of This Infrared Lamp Is Fast Curing Time 50%~90%.
• 💡 [Humanized Design] There Are 40 Heat Dissipation Holes On The Side And Back Of The Infrared Paint Curing Lamp, Which Guarantees Safety And Environmental Protection. There Is A Shock Absorption Device Installed On The Lamp Tube, Which Can Effectively Prevent Collision, And The Lamp Tube Will Not Be Broken Due To Collision.
• 💡 [Wide Application] Infrared Curing Lamps Are Widely Used In Car Spray Booths, Local Paint Drying, Putty Drying, Car Spraying And Baking Booths, Etc. It Is Used For Local Repair, Engine Drying, Strip Removal, Drying Filler, Drying Primer Or Ideal For Preheating Just Before Spraying.