2000W Baking Infrared Paint Curing Lamp, 2PCS Auto Paint Heat Lamp, 110V Body Repair Paint Curing Systems for Automobile Paint Booths, Furniture Paint Booths

ApplicationIt is suitable for car painting, local paint drying, putty drying, furniture local drying, etc. It is an ideal tool for the automotive repair industry, furniture manufacturing industry, and machinery manufacturing industry.How to Install1. Install two heating tubes and secure their ends with two clips.2. Place the net into the casing. (Please be careful not to cut your hand.)3. Secure the two brackets to both ends of the casing with screws.4. Connect the wires at both ends of the lamp (from right to right, from left to left) and connect them to a neutral energized conductor (ensuring that the live wire is at one end and the neutral wire is at the other end).SpecificationsMaterial: Galvanized Sheet, Aluminum AlloyColor: RedStyle: ModernSurface Treatment: High Temperature SprayingAssembly Required: YesNumber of Items: 2Voltage: 110VEach Lamp Heating Area: About 1m ³/ 35.3ft ³Each Lamp Total Power: 2000WPower of Each Heating Tube: 1000WHeating Temperature: RT- 200 ℃/392 ℉Adjustment Angle: 45 ° (Overall), 22.5 ° (Unidirectional)Gross Weight: 1.95kg/4.3lbsNet Weight: 1.45kg/3.2lbsProduct Size: 62x18x5cm/24.4x7x1.96inPackage Size: 65x23x12cm/25.6x9x4.72inPackage Included 2xInfrared Paint Baking Lamps2 Sets of Installation Brackets & ScrewsNotes1. Please note that during the heating process, do not touch its surface to avoid burns.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

• Highly Efficient：Each lamp is equipped with two 1000W heating tubes, which can achieve fast and efficient heating, quickly raising the temperature to a maximum of 392℉, covering an area of approximately 35.3 cubic feet.
• Excellent Work：Short wave infrared has high luminous efficiency, strong penetration, and high thermal efficiency, which helps to penetrate the paint layer and completely dry it, while avoiding air circulation pollution on the paint surface, allowing you to obtain an ideal paint surface with high glossiness and strong adhesion.
• Flexible Angle：Infrared lamp can be adjusted up and down by 45°(total) to provide greater flexibility in the direction of heat transfer, allowing you to find the best position to create the desired effect and bid farewell to limitations.
• Energy Saving：The carbon fiber infrared electric heating tubes can allow heat to flow back through conductive coatings, which is more energy-efficient and cost-effective, taking your factory's efficiency to the next level.
• High Safety：Infrared lamp only requires a low current to operate, avoiding dangerous accidents caused by large currents.