Car Camera Capacitor Filter Connector DC 12V Power Relay Rectifier for Rear View Backup Accessories(Pj004 Delay Relay)

relaySpecificationsProduct name: DC 12V power filter rectifier IMaterial: PlasticCable length: 22.5cmSpecificationsProduct name: DC 12V power filter rectifier IIMaterial: PlasticColor: BlackSize: 4.8×2.6×1.5cm/1.9×1.0×0.6 inchPackage weight: about 17gFunctionIn some models of German and American cars, after engine starting, the output voltage is disturbed. Instead of pure direct current, it powered by impulses superimposed on top oscilloscopes. If can use an oscilloscope to test, you will find that the camera power supply line is directly on the reversing light, because of working voltage unstable cause the camera doesn't work, the output of the video signal is not normal, so you will see on the screen display has serious interference, shaking or can not switch back.Features. Supply the stabilized DC 12V power to the rear view camera.. Solve the issue of the the screen display has interference, shaking or can not switch back when reversing.. Easy to install, input connect with reversing light positive and negative, output wire connect with camera positive and negative.Product SizeDue to manual measurement, there may be an error of 1-2mm.Installation MethodCar Rear View Camera Power Delay Timer RelaySpecifications1. Delayed power supply for 10 seconds2. Product length: about 60cmFuctionAfter the original MIB appears the reversing image (under the premise of no OPS), the image will be displayed on the screen for about 8 seconds when refiling. If there is no video signal from the camera within 8 seconds, MIB will consider the system to be out of order!Generally our cameras are powered by reversing light, when hanging reverse gear, if you do not add other equipment, the camera will not have power supply, so when put into reverse gear again, the screen will not show the reverse image again!Feature. This product delay power supply for 10 second

• relay