Speedway Motors 5/8 Inch Coarse Thread Wheel Stud and Lug Nut Kit, 45 Degree Taper Lug Nut for Increased Strength and Durability, 2.75” Long Wheel Stud, Includes 21/32” Drill Bit

Oversize 5/8" Coarse Thread Wheel Stud 5/8-11 thread x 2.75 lg. .672 DIA knurl. .945 DIA head. Chrome Moly Steel. Lug Nuts Use these oversized 1 inch hex steel lug nuts in place of those 'puny' stock size lug nuts. You will need a 1" hex (6-sided) socket. 5/8" coarse thread fits most racing wheels. Oversized design for increased strength and durability. 45° taper. 5/8" RH coarse thread, Single Taper. What's The Angle Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong. If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels. Drill Bit 21/32" wheel stud drill bit with 1/2" shank. Used to drill out hubs and axle flanges for 5/8" wheel studs with .685 knurl diameter. Included in this Kit: (4) Packs of 5/8" Wheel Studs, (20 total) (1) 21/32" Drill Bit (20) 5/8" Single Sided Lug Nuts

• Oversize 5/8" coarse thread wheel studs are 2.75" long and made from chromoly steel
• Included lug nuts have a 45° taper and are oversized for increased strength and durability
• 21/32" wheel stud drill bit is used to drill out hubs and axle flanges for 5/8" wheel studs
• Wheel studs have a .672" diameter knurl and a .945" diameter head
• Chrome Moly Steel