New Arrivals/Restock

ECCPP 2PCS 4 Lug Wheel Adapters 4x110 to 4x156 with 12x1.25 74mm 1" Compatible with 1998-2015 for A-rctic Cat 400 2002-2004 for Quest 500 1999-2005 for Traxter 500 Wheel Spacers-NOT FIT Stock Rims

flash sale iconLimited Time Sale
Until the end
10
42
08

$29.99 cheaper than the new price!!

Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
New  $49.99
quantity

Product details

Management number 215545675 Release Date 2026/04/12 List Price $20.00 Model Number 215545675
Category
  • [GARAGE CHECKING]:This 1 inch Wheel Adapters 4x110 to 4x156 used to change the rim pattern,please verify you have 4x110 vehicle bolt pattern car,and you need to install not oem stock rims (aftermarket rims)to your vehicle hub.Enter your Year/Make/Model in system garage filter(AMAZON CONFIRMED FIT)to validate product fitment
  • [PARAMETER]:this Wheel Adapters 4x110 to 4x156 with Thickness:1 inch| Vehicle Bolt Pattern:4x110| Wheel Bolt Pattern:4x156| Thread Pitch:12x1.25| Hub Bore:74mm | Recommended Install Torque:70-80 Ft/Lbs| Package Include:2 pcs Wheel Adapters with Thread locker glue
  • [PERFORMANCE]:(1)Increasing the extra gap between tire and vehicle hub assembly,improving the vehicle's performance in terms of handling and traction ,such as improve flexibility when turning.(2)Giving an aggressive performance to your vehicle.(3)Lowering the center of gravity,benefit for keeping stability at a h-igh speed.(4) Av-oid rubbing on the sway bar when install larger tires
  • [INSTALLATION]:Please Make sure that your Vehicle hub bolts size MUST equal to this Wheel Adapters'thread pitch 12x1.25.Requires standard tire repair tools, a torque wrench, and lug socket.Check and re-torque all hardware, including open-end lug nuts securing adapter to wheel hub after some 50-100 miles
  • [LUG BOLTS DESIGN]:While 12.9's are stronger but less ductile which is an issue in a failure scenario. Pre-installed heat treated 10.9 grade studs are more appropriate in the sense that they have higher plastic strain energy, or in simpleton terms: will tend to deform rather than snap.10.9's are more than sufficient for a car application in terms of strength and for the reasons mentioned above are more desirable than 12.9's

Correction of product information

If you notice any omissions or errors in the product information on this page, please use the correction request form below.

Correction Request Form

Product Review

You must be logged in to post a review