COMP Cams 26995-16 Performance Street 1.415" OD Beehive Spring; 1.700" Installed Height; 16 Springs

With a .500 inch maximum lift, these BeehiveValve Springs were designed for hydraulic or solid flat tappet as well as hydraulic roller cams. They are great for Pontiac, Oldsmobile and Small Block Chrysler or other applications that require shorter installation height. COMP Cams BeehiveValve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehiveshape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehivedesign, the valve train can handle more RPM and more aggressive cam profiles. This is the Beehiveversion of COMP Cams Part #995-16 Single Valve Springs.

• Street Ready - The COMP Cams Performance Street spring line is designed to accommodate performance hydraulic flat tappet camshafts.
• Modern Spring Design - Performance Street Springs deliver extra valvetrain stability, ensuring additional durability and performance in street engines.
• Modern Performance + Vintage Iron - COMP's Performance Street Springs are available in installed heights from 1.470" to 1.900" and . O.D.'s from 1.105" to 1.509", making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads.
• Chrysler 273-360 - A great way to enhance your Chrysler 273-360 LA, the 26995 Beehive spring helps to increase lift capacity, extend RPM and provide a more stable valvetrain. Requiring minimal machining to install, the 26995 brings 21st century valvetrain tech to vintage Chrysler LA engines.
• Olds and Pontiac V8 - The 26995 drops into Oldsmobile 260-455 and Pontiac 265-455 V8 engines with minimal machining to the factory head. Ideal for Magnum, Thumpr and Xtreme Energy profiles, the 26995 lightens the valvetrain, allows for more lift and helps extend the RPM range of your Olds or Pontiac V8.
• The 26995 Beehive spring is compatible with 787 and 795 Chromemoly Steel Retainers, 1787 and 1795 Tool Steel Retainers plus 788 Titanium Retainers.
• Made in USA