Belzona 1121 Repair Composite Kit 1kg Super XL-Metal Epoxy Resin for Metal Repair Resurface Structural Adhesive Bearing Room Temperature Cure Solvent Free 2 Parts Base A 0.546kg Solidifier B 0.454kg

Belzona 1121 Super XL-Metal Metal Repair Composite Two Parts Base A 0.546kg + Solidifier B 0.454kg 1kg one Kit Two buckets Set A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material has been developed to offer an extended working life, ideal for large applications where greater volumes of material are required or to provide adequate working time at higher temperatures. Will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools. Key benefits & Feature: Multi-purpose durable repair composite with extended working life Fully machinable using conventional tools Application and cure at room temperature - no hot work involved Simple mixing ratio Reduced health and safety risks as it is solvent-free No shrinkage, expansion or distortion Excellent adhesion to metals including stainless steel, carbon steel, aluminium, brass and copper Will adhere to many other natural and synthetic materials including glass and wood Outstanding corrosion resistance Excellent chemical resistance against a wide range of chemicals Excellent electrical insulation characteristics Applications Function: Resurface of large pitted metal surfaces Repair of damaged shafts and hydraulic rams In-situ flange repair High strength structural adhesive for metal bonding Creation of irregular load bearing shims and reforming of bearing housings Mixing Ratio: 1.2:1 by Weight, 1:1 by Volume Application Temperature: 41°F to 86°F (5°C to 30°C) Working Life: Typically 30 minutes at 86°F (30°C). Mixed Density: 0.043 - 0.044 kg/in³ (2.6 - 2.7 g/cm³) Color: Grey

• Belzona 1121 Super XL-Metal Repair Composite. 1kg one Kit Set. Two Parts, Base A 0.546kg + Solidifier B 0.454kg. For Metal Repair Resurface Structural Adhesive. Room Temperature Cure. Solvent Free.
• 2 Parts, Base + Solidifier. Mixing Ratio: 1.2:1 by Weight, 1:1 by Volume. Application Temperature: 41°F to 86°F (5°C to 30°C). Working Life: Typically 30 minutes at 86°F (30°C). Color: Grey. Volume Capacity: 23 in³/kg (374 cm³/kg).
• Resurface of large pitted metal surfaces. Repair of damaged shafts and hydraulic rams. In-situ flange repair. High strength structural adhesive for metal bonding. Creation of irregular load bearing shims and reforming of bearing housings.
• Multi-purpose durable repair composite with extended working life. Cure at room temperature - no hot work involved. Reduced health and safety risks as it is solvent-free. No shrinkage, expansion or distortion. Excellent High Strength Adhesion. Outstanding corrosion resistance. Excellent chemical resistance. Excellent electrical insulation.
• Cure Time (0.25 inch 6mm film). No Loading Immersion 41°F (5°C) 28hrs, 50°F (10°C) 15hrs, 59°F (15°C) 9hrs, 68°F (20°C) 4.75hrs, 77°F (25°C) 2.5hrs, 86°F (30°C): 1.5hrs / Machining Light Loading 41°F (5°C) 4d, 50°F (10°C) 2d, 59°F (15°C) 27hrs, 68°F (20°C) 16hrs, 77°F (25°C) 9hrs, 86°F (30°C) 5hrs / Full Mechanical Thermal Loading 41°F (5°C) 10d, 50°F (10°C) 5d, 59°F (15°C) 3d, 68°F (20°C) 1.5d, 77°F (25°C) 1d, 86°F (30°C) 16hrs
• Base Gel Strength (4 cm² paddle) at 22°C: 300-400 g/cm, Density: 0.046 - 0.049 kg/in³ (2.8 - 3.0 g/cm³). Solidifier Gel Strength (8 cm² paddle) at 22°C: 130-200 g/cm, Density: 0.039 - 0.043 kg/in³ (2.4 - 2.6 g/cm³). Mixed Peak Exotherm Temperature: 86 - 104°F (30 - 40°C). Time to Peak Exotherm: 60 - 80 min. Mixed Density: 0.043 - 0.044 kg/in³ (2.6 - 2.7 g/cm³). Slump Resistance: Nil at 1.0 in. (2.5 cm). VOC Content: 0.05% (1.29 g/L).