Audio-Technica AT875R Line Gradient Shotgun Condenser Microphone with 10 Ft XLR Cable, Windscreen, Protective Pouch, Stand Clamp, Threaded Adapter, and 6Ave Cleaning Kit

With its smooth on axis tone, great off axis rejection, and straightforward operation, the Audio Technica AT875R short shotgun microphone is well suited for budget conscious indie films, TV shoots, nature recording, and documentary projects where simplicity and quality sound are prioritized. The AT875R's high sensitivity allows it to perform reliably with a variety of microphone preamp classes. Its full spectrum frequency response utilizes a gentle increase in high frequencies to enhance intelligibility and compensate for loss in clarity resulting from wind protection. The durable housing ensures rugged dependability while maintaining a light weight that won't burden your boompole or camera, and the included accessories accommodate mounting the AT875R to a mic stand, boompole, or camera mount microphone holder.Bundle Items Included:1 x Audio Technica AT875R Short Shotgun Microphone1 x Audio Technica AT8405a Snap-in Microphone Stand Clamp1 x 5/8in-27 to 3/8in-16 Threaded Adapter1 x Foam Windscreen2 x O Rings1 x Soft Protective Pouch1 x Hosa 10 Ft XLR Cable1 x Goby Labs Sanitizer Spray for Microphones1 x 6Ave Microfiber Cleaning Cloth1 x Limited 5 Year Manufacturer Warranty

• Being less than 7 inches long, the AT875R is equally at home on a boompole or atop a camera. It uses an interference tube and a supercardioid polar pattern to yield focused on axis directionality while attenuating rear entry sound and rejecting sound at the sides.
• With a balanced 3 pin XLR output and support for 11 to 52 VDC phantom powering, the AT875R is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built in preamps on many camcorders and cinema cameras.
• The AT875R includes a mic clip for easy placement on a mic stand or boompole.
• The AT875R also includes two rubber O-rings that expand the microphone's diameter to fit the larger mic holders found on many high-end cameras.
• The AT875R has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners.