New Arrivals/Restock

12HP 2-Stroke Outboard Motor, 169CC Short Shaft Fishing Boat Engine with Water Cooling, Silencer & Anti-Swirl Plate for Inflatable, Fiberglass & Wooden Small Boats

flash sale iconLimited Time Sale
Until the end
12
30
43

$387.00 cheaper than the new price!!

Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
New  $645.00
quantity

Product details

Management number 216739989 Release Date 2026/04/19 List Price $258.00 Model Number 216739989
Category

SpecificationsColor: BlackMaterial: Aluminum AlloyDisplacement: 169CCCylinder: 2Horsepower: 12HPCooling System: Water-coolingIgnition System: CDIControl System: Tiller ControlStarting System: Manual StartTrim and Tilt System: Manual TiltGasoline Type: #92 GasolineMixing Ratio: Fuel:Oil = 25:1 for New Machines. Break-in Period 10 Hours 50:1Recommended Lubricant: 2 Stroke Lubricating OilSpeed (r/min): 4500-5500Speed: 8-30 km/hour /4.97-18.64 miles/hGear Positions: F-N-RGear Ratio: 2.08(27:13)Number of Propeller Blades: 3Suitable Number: 2-3 PeopleSuitable Tailboard Height: ≤44cm/17.32inchSuitable Tailboard Thickness: 25-45cm/ 9.84-17.72inLength of Vessel Used: < 6m/ 19.69ftWeight of Vessel Used: <300kg/ 661lbsThrust: 300-800kg/661-1763lbs for This Year Speed 15-30 km/hour ( Depending on the Environment, Waters, Hull Load Speed Will be Different )Bore*Stroke: 50*43mm/ 19.69*16.93inRecommended Propeller Range: 3-8.9"x8.5”Standard Fuel Tank Capacity (External Oil Tank): 24L/ 6.34Gal Silencer Size(L*W): 40*26cm/15.75*10.24inchProduct Height: 102cm/40.16inchPackage Size: 108*68*41cm/ 42.5*26.77*16.14inNet Weight: 29.9kg/ 65.92 lbsGross Weight: 34.4kg/ 72.75 lbsPackage Included1* Outboard Motor1* Flameout Rope1* Oil Pipe1* 24L Fuel Tank1* Split Pin1* Spark Plug1* Water Pump Impeller1* Starting Rope1* Paper Pad1* English Instruction ManualAll Needed AccessoriesTwo-stroke Engine Oil Mixture RatioDuring the Break-in Period 25:1 After the Break-in period 50:125L 1000ML 25L 500ML12L 480ML 12L 240ML10L 400ML 400ML 10L 200ML5L 200ML 200ML 5L 100ML1L 40ML 40ML 1L 20MLNotes1.Please note that this product must be started in water, and it is not allowed to start the engine on shore.2.Please note that the two-stroke outboard engine must use a mixture of 92 # gasoline and two-stroke engine oil. In addition, gasoline and oil must be premixed and stirred evenly before being poured into the tank.3.Please note that the running-in period is about 10 hours or one month. During the running-in period, do not drive with a high throttle.4.The volume ratio of gasoline to oil during the running-in period of the new engine is 25:1. After the running-in period, the volume ratio of gasoline to oil is 50:1.5.Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about 6 months;6.When the outboard motor is started, loosen the exhaust screw on the fuel tank cover counterclockwise. The emergency flameout rope shall be inserted, and the other end shall be placed on the wrist or belt.7.When the motor has no water outlet, please stop using it immediately, and then check the water pump impeller or check whether the water outlet is blocked.8.To avoid scratching the cylinder, please do not do the following: start the motor in the water;use the motor when it stops cycling water.9.Two-stroke air-cooled engines must use TCW-2 engine oil, which must be specifically designed for outboard engines.10.Fuel mixture ratio: 25:1 for the first 50 hours, 50:1 after 50 hours.11.Two-stroke outboard engines must use a mixture of 92# gasoline and two-stroke engine oil.12.During the break-in period, the volume ratio of gasoline to oil is 25:1. 13.After the break-in period, the volume ratio of gasoline to oil is 50:1.14.Important note: Gasoline and oil must be pre-mixed and thoroughly stirred before being poured into the fuel tank. 15.The outboard motor must be started in water, please do not start the engine on land.16.When starting the engine, loosen the vent screw on the fuel tank cap counterclockwise.17.When starting the outboard motor, insert the emergency stop rope and secure the other end to your wrist or belt.18.The break-in period lasts approximately 10 hours or one month. Please avoid operating the engine at high throttle during the break-in period.19.After the break-in period, replace the gear oil. The second replacement should be performed after approximately 100 hours or six months.20.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

  • 12HP 2-Stroke Outboard Motor: The 2-stroke 12hp engine with 5500rpm can provide 661-1763lbs thrust and 8-30km/h speed to give you a comfortable and labor-saving sailing experience.
  • Multi-gear Cruise: This product has three gears for infinitely variable transmission: forward gear, neutral gear, and reverse gear, and you can also cruise at a constant speed so that you can enjoy different cruise experiences according to your needs.
  • Convenient to Use: The CDI ignition device and manual start allows you to start quickly and safely. The flameout switch on the handle allows you to stop the engine with one button, providing convenience and saving time.
  • Excellent Heat Dissipation: Its water cooling system helps to cool the motor and has better performance. The design of the vent can also extend its service life.
  • User-friendly: The ergonomic control handle allows you to turn easily. The equipped silencer brings you a quieter sailing experience. And the 6.34Gal external oil tank saves you the trouble of adding oil frequently.
Color 12HP 2-Stroke Short Shaft
Brand Name TANAUT
Engine Type 2 Stroke
Manufacturer TANAUT
Model Number 12HP 2-Stroke Short Shaft Outboard Motor
Material Type Aluminum
Maximum Horsepower 12 Horsepower
Engine Displacement 169 Cubic Centimeters
Included Components 1x Outboard Motor
Manufacturer Part Number ASQE1
Manufacturer Warranty Description 1 Year

Correction of product information

If you notice any omissions or errors in the product information on this page, please use the correction request form below.

Correction Request Form

Product Review

You must be logged in to post a review