Okin Recliner/Lift Chair Hand Control 2 Button 5 Pins OEM

This is an okin 2 button hand control The Hand Control has 5 pins and is compatible with any 5 pin hand control This hand control will work with any of the following motors, plus more This hand control is used in over 4,000 different chairs and 10,000 different motors, below is an example of the motor numbers 1.22.000.568.30 1.22.000.651.30 1.22.000.679.30 1.22.000.680.30 1.28.000.002.59 Gray Pride Deltadrive 1.28.000.013.30 1.28.000.015.30 1.28.000.015.30 1.28.000.050.30 1.28.000.052.30 1.28.000.074.30 1.28.000.086.30 This is a Golden Technologies motor with a hardwired DC cable. You will need to order a p120 DC cable also. This will make the cable long enough to reach your power supply and easy to replace only the cable if it happens to get damaged. 1.28.000.093.30 1.28.000.095.30 1.28.000.108.30 1.28.000.110.30 1.28.000.110.30 1.28.000.122.30 1.28.000.131.30 1.28.000.131.30 1.28.000.132.30 1.28.000.149.30 1.28.000.160.30 1.28.000.164.30 Black Pride etc Deltadrive 1.28.000.190.30 9.28.000.046.30 9.28.000.058.30 9.28.000.070.30 9.28.000.073.30 9.28.000.092.30 9.28.000.104.30 9.28.000.106.30 9.28.000.111.30 9.28.000.117.30 9.28.000.129.30 9.28.000.130.30 9.28.000.136.30 **COMES WITH STRAIGHT CONNECTION** this connection usually fits into the side pocket of the existing 90 degree angle connection with the clamp that is called the Quick Disconnect Cord. Quick Disconnect Cord sold separately at this link: http://www.amazon.com/dp/B00WTM3DQ0

• Okin 2 Button Hand Control for Lift Chair
• Lift Chair Hand Control
• Compatible With Any 5 Pin Hand Control
• OKIN OEM Part
• **Product appearance may vary between the 2 pictured hand controls**