Tile Spacer Punch: Hard to remove spacers? Hammer in 1/16 1/32 1/8 inch tile spacers without chipping tiles - Push leave in tile spacers evenly no twisting to a depth suited to grout over.

THE TILE SPACER PUNCH Shaped like a spacer, even pressure is applied to spacer arms. No twisting or need to dig out spacers due to a tip of a spacer showing through the grout. A gauge to ensure tile spacers are bedded at a depth suitable for grouting over. Ensures the grout will bond properly. Designed to be used with force as a punch. Pushes those hard to move spacers pinched tightly in tile joints by the weight of the tiles with a bump of the hand or a mallet. You may also use the punch while grouting to bang in those spacer tips showing through the grouted surface. A wedge effect from the tip to the handle. This ensures no tiles will be chipped/damaged due to no direct pressure being applied to tile edges.

• Wedge effect to prevent chipping tiles when forcing in tile spacers. Saving the cost of replacement tiles and time
• A tough ABS plastic tiling tool, shaped to suit tile spacers, while being gentle on tile corners. Built tough enough to use a hammer to knock in any hard to remove tile spacers.
• Push or punch in 1/16 1/8 1/4 1/32 inch tile spacers. All size cross spacers. Easily modified to suit T shape tile spacers
• A notched gauge to ensure a good depth is achieved when pushing in leave in tile spacers
• Shaped like a tile spacer, stopping twisting, bending and splitting of tile spacers arms. Stopping twisting helps to create neater grout lines.