M-77 Lubricant Paste Grease Silicone + Moly, 7.5 LB, Compare to Dow M77

A multipurpose, extreme pressure lubricating paste that can be used over a wide temperature range. It contains over 60 percent molybdenum disulfide lubricating solids in a Lithium soap thickened ultra-high performance silicone fluid. Suitable for lubrication points with low to moderate loads and low speeds which are subjected to water and extreme loads and temperatures. At temperatures above 230ºC (446ºF), the carrier volatilizes leaving virtually no residue and the remaining dry sliding film itself takes over the lubrication up to 400ºC (750ºF). APPLICATIONS: - A running-in lubricant for new or rebuilt equipment including gears, splines, journal bearings, cams and ways. - An assembly lubricant to reduce torque in fastening and unfastening of threads and bolts, minimize tension variation in bolts, facilitate assembly and disassembly and help prevent damage to threads. - Press-fitting lubricant to allow press fitting without chatter or stick-slip that reduces the fit force pressure required for interference fitting and minimizes distortion. - General-purpose lubricant for bearing shafts, bushings, splines, O-rings, packings and seals (except silicone rubber). - Assembly applications where high temperature is a factor. - Lubricating during running-in of gears, splines, journal bearings, cams; reducing torque in tightening threads and bolts; lubricating bearing shafts, O-rings, packings and seals, brake assemblies; press-fitting. - Metal/metal combinations with frictional and contact surfaces, brake anchor plates, and the brake pistons of disc brakes. - Suitable for lubricating parts consisting of materials that are not resistant to mineral oils. - Paste lubrication up to 230ºC (446ºF). Dry lubrication up to 400ºC (750ºF). - Good water resistance. Good volatilization properties. NOT tested for food, medical or pharmaceutical.

• For automotive and heavy duty general industrial use. Compare to ingredients in Dow M-77.
• Over 60% Molybdenum disulphide (CAS# 1317-33-5); Dimethyl, phenylmethyl siloxane, trimethyl terminated (CAS# 63148-52-7); 12-Hydroxy lithium stearate (CAS# 7620-77-1).
• Silicone oil based; contains NO mineral or petroleum oils so it is safe for most plastics and rubbers.
• Extends the wear life of moving parts and equipment. Prevents galling during machinery running-in period.
• Good water resistance. Good volatilization properties. Help protect against fretting corrosion and cold welding of moving joints.