Electric Sanding Blaster Dental Recyclable Sandblaster Machine Lab Equipment

Specification: Power supply voltage:110V/60Hz±10% Power:25W Range voltage:0-0.65MPa Pressure :0.4-0.6MPa 6kg/cm Consumption :0.15m2/mm Dimensions:58×42×42cm Net weight:18kg Gross weight:19kg Cautions: 1. The nozzles are consumable accessories. Replace them in time once they are worn out. 2. To replace the nozzles, unscrew the nuts on the nozzle, and then replace them, and then assemble the new nozzle in order. 3. The emery of 60 meshes is recommended to be used in this recyclable sandblaster. 4. User should clean the machine regularly in order to avoid pipe jamming. 5. If the sand pipe is jammed, block the spout to allow the air to flow backwards and clean the pipe. 6. The sand outlet pipe must be inserted to the bottom of the sand funnel to assure the smooth flow of air in the sandblasting process. 7. You must put the sealing underlay well when replacing the observing window, screw down the press plate. 8. Before using, paste the thin plastic paper to the observation window in order to avoid the glass of becoming dark and unclear. Replace the plastic sheet regularly.

• ♥♥♥It achieves automatic sand circulation according to the principle of pneumatic negative pressure siphon.
• ♥♥♥ It also has a delicate design and strong compatibility and it is easy to repair.
• ♥♥♥ Its other characteristics are: big observation window and strong blasting power.
• ♥♥♥ The sealant used on the machine is used for car windows.
• ♥♥♥ The cold light source gives better viewing results.