Red Oak Wood Veneer edgebanding 4" x 120'' with preglued hot melt Adhesive

Red Oak wood veneer edgebanding 4" inches x 10' feet with preglued hot melt adhesive and thin fleece backing 1/40" thickness. Use heat from household iron, heat gun or hair dryer and apply pressure while cooling then trim with utility knife, edgeband trimmer (shown - sold separately) or sand off excess. Orders for more than one roll of 10' feet will be sent in one continuous roll. Some photos may be of other widths and show the product wet or show the glue side. Grain is usually straighter than wider and more open, but can be either. Each roll carefully inspected and packaged by our company. This is the product used most often to edge or cover long narrow surfaces. Ships rolled in small box. Faster usually available. Widths from 1/2" to 6" are available in both preglued (this listing) and nonglued. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.

• Model: Wood veneer edge banding Oak Red thin fleece back, Wood Type: Oak
• Brand: Red Oak wood veneer edgebanding hot melt adhesive
• Veneer Type: Fleece backed
• Veneer Cut: Plain Sliced