Alder edgebanding Wood Veneer 2" x 120" preglued with hot melt Adhesive 1/40"

Alder Clear wood veneer edgebanding 2" inches x 10' feet preglued with hot melt adhesive and thin fleece backer 1/40" thickness overall. Use heat from iron or hair dryer to activate adhesive glue and apply pressure while cooling then trim with utility knife or edgeband trimmer (shown - sold separately) or sand excess if any. Some photos are of wet or finished Alder to show the color and grain more accurately. These would be the darker photos. The fleece backing is very thin (see through) and generally not relevant. It serves to hold the product together and assist with finger joints. Knotty Alder is generally not specified in edgebanding since it is too infrequent in occurrence to result in showing much in a narrow piece of edgebanding. Other widths, nonglued prefinished and thicker 1-2-3mm rolls also available. Ships rolled in small box. Orders for more than one roll will be sent in one continuous roll. Faster is usually available. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.

• Model: Preglued edge banding thin hot melt adhesive trim, Wood Type: Alder
• Brand: Alder Clear wood veneer edgebanding roll fleece
• Veneer Type: Fleece preglued
• Veneer Cut: Plain Sliced