Z Aqua-Thane M35 Water-Based, Polyurethane Coating, Satin Finish, Matte Concrete Sealer
4.0 (48 items)
Limited Time Sale$31.20 cheaper than the new price!!
Free cash-on-delivery fees for purchases over $99
Product details
| Management number | 218616172 | Release Date | 2026/05/03 | List Price | $20.80 | Model Number | 218616172 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Surface Prep: New concrete must be completely cured before applying sealer. Moisture remaining in the concrete can cause adhesion issues. Check w/ a moisture meter or by taking several 6x6” sheets of clear plastic & thoroughly taping it to the surface completely around the edges. If after 24 hrs the plastic is dry, it’s assumed there’s no hydrostatic pressure issues. If acid stains/washes are used, the concrete must be neutralized to pH 7. A light sanding with 100-200 grit is recommended on all new hard-troweled concrete to open the surface & promote adhesion. On burnished, highly-polished or concrete cast against smooth surfaces, additional sanding or acid etching may be required for the best adhesion properties. On textured/stamped concrete, no additional steps are required but in all cases concrete should be clean & 100% free of all dust/debris/previous coatings. Mixing: Mix exactly 4 parts A to 1 part B. Mix w/ a paint mixing stick & scrape the sides of your mixing container for a uniform mixture. Mix well for 2-3 minutes. Failure to properly mix may result in adhesion/hardness issues. Pot life of mixed components is roughly 45-60min @ 75ºF. Application: Surface should be 55ºF & 85ºF. In smaller areas like countertops, a 1/4” nap roller or a micro-fiber applicator pad is recommended. Product should be applied in thin/even coating. Don’t allow to puddle in low areas. Back-rolling may be necessary to control thickness & guarantee uniformity. 2 coats should be applied for sufficient protection. On rough/more porous concrete additional coats may be needed. Always test w/ water to confirm concrete is adequately sealed. Recoat time is 4-8 hours @ 75ºF & the 1st coat should be tack-free. If this window is missed, the 1st coat may have to be lightly sanded w/ 300 grit paper before applying a 2nd coat.
- Z Aqua-Thane M35 is a water-based, two-component, self-cross-linking polyurethane coating. It exhibits a satin finish and offers superior stain, abrasion, and chemical resistance. The durability makes this sealer ideal for high-traffic areas. Z Aqua-Thane M35 is safe for indoor or outdoor use.
- Provides a matte/ satin, abrasion resistant finish; Excellent chemical resistance, UV-Resistant, Fast-drying
- Very slight, incidental darkening on colored concrete (no darkening on white concrete)
- Aqua-Thane G40 vs. Aqua-Thane M35 - The G40 has a semi gloss finish and will darken or "wet out" the concrete very similar to when water is applied to an unsealed surface. The M35 has a matte/satin finish with very slight darkening on colored concrete.
- Coverage - 50-75 sq. ft. @ 2 coats (one 1.5 qt. kit); *Avoid sticking tape to sealed concrete. Chemical bonds can form between glue & sealer which can be strong enough to pull off sealer & stain. If this happens, these areas can normally be sanded & spot fixed*
| UPC | 716417734505 |
|---|---|
| Color | clear |
| Item Form | Liquid |
| Brand Name | Z Counterform |
| Style Name | Water-borne, two-component, self-cross-linking polyurethane coating, satin finish |
| Unit Count | 40.0 Fluid Ounces |
| Item Weight | 2 Pounds |
| Manufacturer | Walttools |
| Material Type | Polyurethane |
| Number of Items | 1 |
| Compatible Material | Concrete |
| Surface Recommendation | Countertop |
| Water Resistance Level | Water Resistant |
Idler Bearing
Concrete
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form