17.9x7.8in Concrete Stamps Mat Red Concrete Texturing Skin Concrete Seamless Cement Stamping Tools PU Stone Texture Stamping Mat with 2 Handles for Wall&Floor Imprinting, Red

DescriptionIf you want your floor or wall to look more aesthetically pleasing then this concrete stamping mold would be the ideal purchase, it is made from a sturdy PU that is impact and abrasion resistant for a long life. Its clear stone pattern adds a creative pattern to the concrete surface and adds a non-slip effect. It will provide the ideal solution for your unique indoor or outdoor decorative projects!SpecificationsMaterial: PUTexture Style: Stone TextureColor: RedAssembly Required: NoNumber of Pieces: 1Operation Mode: ManualProduct Size: 45*20cm/17.9*7.8inchPackage Size: 45.5*20*3cm/18*7.8*1inchNet Weight: 1.5kg/3.3lbPackage Included1* Concrete Stamping MoldConstruction Process of Embossed Floor1. The formwork erection, paving, vibrating, grouting, and leveling shall be completed according to the construction procedures of pavement concrete.2. Before the initial setting of the concrete surface, use a large magnesium alloy spatula to smooth the concrete surface.3. Use special magnesium alloy edge finishing plaster to finish edges and corners as required.4. Spread the colored reinforcement evenly on the concrete surface two times, the first time spreading 2/3 of the standard amount (6.6 lbs per square meter), and the second time spreading the remaining 1/3.5. Every time the color reinforcement is sprayed, the magnesium alloy trowel shall be used for leveling and polishing after the color reinforcement is wet so that the color reinforcement can completely cover the concrete surface.6. After the initial setting of the color strengthening material, when the surface is dry, evenly sprinkle the coating on the surface, and the standard dosage per square meter is 0.33 lbs.7. Press the die alternately and progressively. The die shall be formed once to avoid repeated stamping.8. Brush the floor surface evenly three days after the completion of the die. A small amount of detergent can be added during cleaning. Cut the expansion joint in time before cleaning.9. After the floor surface is completely dry, it must be sprayed with color art floor protective agent, the standard dosage is 0.33lbs per square meter. The protective agent can spray with a roller brush or spray barrel.NotesPlease allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

• 🌈【Large Area with Strong Fit】This red concrete stamps mat has a large area (17.9x7.8 inches), high fit and no seams for stamping. The groove design is easy to align and not easy to fall off. Dual handles design, more convenient operation, you can easily align and remove the pad, cover a large area at a time, labor-saving and convenient!
• 🌈【Natural Stone Texture Pattern】The inner surface of this concrete seamless cement stamping tool has smooth lines and the design has a natural and modern stone texture, adding some dimension and artistry to a monotonous pavement or wall, providing a unique area marker for a home or store wall
• 🌈【Great Stamping Effect】This stone texture stamping mat has a great fit, stamped without seams, not easy to peel off. The smooth lines of the inner surface create a clear, three-dimensional texture pattern that is naturally beautiful
• 🌈【Durable Material】The concrete stone texturing mat is made of high quality PU material, not easy to deform, wear-resistant, tear-resistant, smooth surface, easy to clean (can be rinsed with water), and can be reused many times on any building wall.
• 🌈【Wide Application】Our concrete stamps mat are suitable for both walls and floors. Lightweight (3.3lbs), portable, widely used in indoor and outdoor floors and walls, patio paths, driveways, pool decks, sidewalks, parking lots and other concrete stamping, can provide high-quality and beautiful stamping decorative effects