PERFERATE 982 Glue Dispenser 110V AC Semi-Automatic Adhesive Dispenser Machine High Precise Glue Dot dispensers Solder Paste Liquid Adhesive Controller Dropper Machine

Description：Semi-automatic Glue Dispenser MachineAre you affected by the slow speed of traditional drip glue, which affects productivity? Are you often wasting a lot of glue material? Do you feel that the precision of glue dripping is low and difficult to control? Choose this semi-automatic glue dispenser machine, which can precisely control the dripping speed and improve the working efficiency, bringing you a more efficient and energy-saving working experience!Specification:Color: BlackModel: 982Material: MetalSpitting Mode: Manual / Semi-automaticMinimum Drip Volume: 0.01mlSpitting Time Interval: 0.1-9.9sAutomatic Timing(Can Be Set): 0.01-30s Repeat Accuracy: ±0.5%Internal Voltage: 12-24DCInput Air Pressure: 2.5-7bar(35-100psi)Output Air Pressure: 0.1-5.5bar(1-78psi)Power Supply: 110V AC, 60Hz Power Consumption: 20WPlug Specification: American Standard 110VProduct Size:23×15×6cm/9.05×5.9×2.36inPackage Size:20×26×14cm/10×9×12.5inGross Weight: 2.1kg/4.63 lbsPackage Content:1× Dispenser Main Unit1× Manually Switch1× Foot Switch1× Air Tube1× Connection Tube1× Power Cord1×Dispenser Stand2× 30CC Liquid Barrels6× Dispensing Needles1× Chinese and English ManualNotes: 1.The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors.2.If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use.3.When the material concentration is too large (flow difficulties), can not drip, if you want to use it, according to the manufacturer's instructions dilute the use; before work, the material must be fully stirred evenly to ensure that the size of the drip consistent.4.Automatic state, the general air pressure adjustment in the machine at 1-2.7bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position. Too much pumping back will flush the piston and destroy the normal operation. 5.Automatic state work, according to the actual situation, timely removal of the material left at the needle nozzle, these materials gradually curing will block the muzzle discharge and back pumping; after work, the barrel should be cleaned in time, otherwise, the barrel's disassembly will be very difficult.

• 【Vacuum Suction】 - This glue dot dispenser features a vacuum suction device that effectively prevents adhesive dripping during operation, enabling more precise dispensing
• 【Rapid Start】 - Utilizes high-quality electronic valves to instantly activate diaphragm valves, boosting operational efficiency by over 80%
• 【Precise Dispensing】 - Minimum dispensing volume: 0.01 milliliters. Discharge interval: 0.1-9.9 seconds. Achieves precise dispensing with approximately 0.5% repeatability accuracy
• 【Semi-Automatic】 - Combines automatic dispensing with single-nozzle manual precision control. Set the switch to automatic mode for hands-free operation
• 【High Precision】 - Precision air pressure gauge accurately regulates air pump intake pressure, ensuring precise pressure conversion and preventing air tube rupture