10000 CPS Viscosity Commercial Hot Melt Glue Spray Injecting Machine Glue Dispenser Professional Adhesive Injecting Dispenser Equipment(110V 900W)

Adhesive Dispenser Hot Melt Glue 0-300 C Gluing Machine 110V 3KG/HRFeatures：Model: X001Power: 900WSol speed: 3KG/HRSolvent capacity: 3KG/HRMaximum viscosity; 10000 CPSWorking temperature: 160-180°CTemperature control range: 0-300°C Safety Precaution:Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive1. The gas circuit should avoid too much water vapor entering2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket.3.The maximum total air pressure is set to 4KG4. Before heating the melted glue, the pressure of the storage bucket must be released first.Preparation for Operation1. Confirm the safety protection measures2. Check if the machine is 110VAC and there is no fluctuation in the pressure3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier)5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.6. Check if the air supply system is basically dry and the air pressure is stable7. Power on and test the circuit of each part.Boot Steps1. Connect the power and turn the power switch to ON2. Check if the temperature of the temperature controller is within the above range3. Check whether the pressure relief is turned in the direction of pressure holding4. Connect the origin, set the pressure value, and start the operationNOTE: The product needs to be used with an air compressor

• ✅ 【Specification】Model: X001; Power: 900W; Sol speed: 3KG/HR; Solvent capacity: 3KG/HR; Maximum viscosity; 10000 CPS; Working temperature: 160-180°C; Temperature control range: 0-300°C
• ✅【Professional Glue Machine】This commercial hot melt glue gun is made of high-quality materials, with a strong and durable appearance, with good impact resistance and heat dissipation. The surface has been carefully painted to make it have superior anti-oxidation properties, not easy to age and rust, and have a long service life.
• ✅【Wide application】This high-quality hot melt glue gun is widely used in the bonding, fixing, wiring, insulation, etc. of toys, trinkets, small household appliances, handicrafts, electronic components, etc. It has stable and superior performance and is a good helper for DIY design.
• ✅【Precautions】Please always wear safety gloves, goggles and long-sleeved overalls when using the machine to avoid being scalded by hot liquid hot melt glue; the pressure of the storage tank must be released before heating the melted glue; the maximum total The air pressure is set to 4KG; the air circuit should avoid too much water vapor entering; the hot melt adhesive capacity should not exceed seven points of the storage tank capacity.
• ✅ 【Customer Service】Our products are sent from the US and can be delivered quickly.Our products have undergone strict quality inspection procedures to ensure that the products put into the market are of high quality. If you have any questions, please feel free to contact us. We will sincerely provide you with high-quality service and bring you a pleasant shopping experience.