Semi Automatic Glue Dispenser Machine Pneumatic Dispensing Controller 982 Automatic Timing Solder Paste Controller Glue Dropper Liquid Adhesive Dispenser Vacuum Back Suction

Specification● Model: 982● Material: Metal● Spitting Mode: Manual / Semi-automatic● Minimum Drip Volume: 0.01ml● Spitting Time Interval: 0.1-9.9s● Automatic Timing(Can Be Set): 0.01-30s● Repeat Accuracy: ±0.5%● Internal Voltage: 12-24DC● Input Air Pressure: 2.5-7bar(35-100psi)● Output Air Pressure: 0.1-5.5bar(1-78psi)● Power Supply: 110V AC, 60Hz● Power Consumption: 20W● Plug Specification: American Standard 110V● Product Size:23*15*6cm/9.05*5.9*2.36inPackage Included● 1* Dispenser Main Unit● 1* Manually Switch● 1* Foot Switch● 1* Air Tube● 1* Connection Tube● 1* Power Cord● 1* Dispenser Stand● 2* 30CC Liquid Barrels● 6* Dispensing Needles● 1* ManualNote● The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors.● If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use.● When the material concentration is too large (flow difficulties), can not drip, if you want to use it, according to the manufacturer's instructions dilute the use.● Automatic state, the general air pressure adjustment in the machine at 1-2.7bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position.

• 【Semi-automatic Design】This glue dispenser can be both automatically dripped by the machine and precisely controlled by a single-hole hand switch. And, you can set the switch to the automatic position, to achieve a more efficient and higher-quality working method.
• 【Vacuum Back Suction】This semi-automatic glue dispenser machine is equipped with a vacuum back suction device, which can effectively avoid the glue from dripping during use to achieve a more accurate glue dripping, and ensure a clean environment.
• 【Quick Start】This glue dispenser adopts a electronic valve, which can instantly start the diaphragm valve and increase the working efficiency by more than 80%. The high-precision air pressure gauge can precisely control the air pressure input to the air pump and convert the air pressure precisely.
• 【Precise Drip】The minimum drip volume is 0.01ML, and the spitting interval is 0.1-9.9s. This semi-automatic glue dispenser machine can drip precisely and achieve a repeat accuracy of about 0.5%. It is also equipped with a single-hole hand control switch, allowing you to control it personally by hand for more accuracy and timeliness.
• 【Application】It is suitable for most of the yellow glue, quick-drying glue, epoxy resin, etc. in the market, and is widely used in bonding various electronic components, machine production, instrumentation, jewelry, and other objects. Features a high-end all-copper coil transformer, which can stabilize the voltage change and increase the service life.