T12 75W Digital Soldering Iron StationTips Welding Rework Station temperature adjustable control microcontroller(Pink,US)

T12 75W Digital Soldering Iron StationTips Welding Rework Station temperature adjustable control microcontrollerthe color of the handle will be sent randomly as below imageFeatures:Using STC15W408A5 microcontroller,Use sGM855xN high precision op amp,Fast heating speedAccurate temperature control,Regain temperature quickly,User-friendly settings, diversified options can be set,With NTC ambient temperature compensation,Various protection and energy saving technologies,With buzzer tips.Data memory functionSoldering tip and soldering heating element integratedSoldering iron tips can be replaced and changeSpecifications:Temperature range :150--450 degreepower:75Woutput voltage: 24VInput voltage:100V-240VMain unit Dimension: 152mm X 88mm X 45mmScreen size:23mmX15mmWeight: about 930gLength of soldering iron handle: 18cmNormal use:1. Under normal circumstances, turn on the heating mode when you turn it on. Rotate the temperature control button to adjust the temperature. After turning off, turn on again and automatically remember the temperature set at the last shutdown.2. Under normal working conditions, short press the encoder once to enter the temperature enhanced mode for temporary welding of large solder joints. When the temperature is enhanced, the ten decimal point flashes quickly as a reminder. The enhanced temperature and time can be set in the menu. Automatically restore the original set temperature.3. Press and hold the encoder slightly for about one second to enter the manual standby mode, the temperature drops to 200 degrees, pick up the handle or the encoder will automatically restore the original set temperature if there is any action4. After manual standby, long press the encoder for about one second to enter the soft shutdown mode. The digital tube displays OFF. When you pick up the handle or the encoder, any action will automatically restore the original set temperature.5. The handle vibrates during the welding process, and the hundred decimal point will flash to show the vibration sensor action. 6. When not welding for a long time, the control panel will automatically wait for 200 degrees according to the menu setting time and then automatically shut down automatically. Raise the handle or turn the encoder to restore the original set temperature.Introduction for heater:T12 LCD Note: Due to cost, we did not include the power adapter cable==========Hign-concerned Chemical : NoneIs Smart Device : NoOrigin : Mainland ChinaDimensions : 25x8x4cmModel Number : T12Input Voltagle : Ac100-240VOutput Temperature : 150-450CTemperature Stability : 20CCertification : CEOutput Voltage : 75W

• ​​Precise Temperature Control & Rapid Heating:​​ Utilizes an STC15W408A5 microcontroller and sGM855xN high-precision op-amp to maintain accurate temperatures between 150°C–450°C (±20°C stability). The 75W power delivers fast heating and quick recovery for efficient soldering and rework
• Smart User-Friendly Features:​​ Auto-saves your last temperature setting upon shutdown, and offers adjustable modes like temperature boost (for large solder joints), manual standby (drops to 200°C), and soft shutdown. Includes NTC ambient temperature compensation and vibration detection alerts
• Energy-Saving Safety Functions:​​ Automatically enters standby mode (200°C) after inactivity and powers off completely to save energy. Buzzer alerts and handle vibration enhance safety. Certified CE for compliance
• Durable Integrated Tip Design:​​ Features replaceable T12 soldering tips with integrated heating elements for optimal heat transfer. Compatible with various T12 tips to handle diverse tasks. (Note: Power adapter cable not included)
• Compact & Versatile Operation:​​ Supports 100V–240V AC input (24V/75W output) and fits small workspaces (main unit: 152×88×45mm). Includes an 18cm handle (color randomized) with a clear digital display (23×15mm screen), weighing only 930g. Ideal for DIY or professional use.