VEVOR Solder Fume Extractor, 150W 165CFM Soldering Smoke Extractor with 3-Stage Filters, 3 Speed Adjustable Smoke Absorber and Purifier for Soldering, Engraving, DIY Welding, Salon

key FeaturesProfessional PurificationThe exhaust and dust pass through 3 stage filters of the fume, an impressive 99.91% of the tiniest particles in the air are absorbed. When the filter elements are blocked, the automatic filter block alarm will sound to remind you. 3-Stage Speed One button controls 3 levels of speed. You can adjust the flow speed from weak to strong according to the environment. Low Noise MotorBoasting a 150W DC motor that can reach a max airflow speed of 280 m3/h, this welding fume extractor has a strong suction power while maintaining a noise below 63. Long Flexible Hoses Our smoke extractor comes with two 1.2 m (47.2inch) 360° extractor tubes, which can easily stretch, bend and rotate to the angle you need.Easy MovementThe dimension of the fume extractor is 11 x 11 x 16.9 inches. It's about the size of A4 paper. You can put it on the table or under the table. Two 360 degree casters with 2 lockable wheels make it move freely in your work area.Wide ApplicationSuitable for bench top soldering and electronic rework applications as well as laser, handheld machining operations. Widely used in physiotherapy, laser engraving, chemical experiment, home and office.SpecificationsModel: FL250Filtering Effect: 0.3μm 99.91%Systemic Flow: 165 CFMMax Rotation Speed: 4500 RPMNoise: 63 dbPower: 150 WFliteration Expansion Area: 2.1m2Length of Smoke Tube: 1.2 m/47.2 inchProduct Dimension: 11 x 11 x 16.9 inchPackage Content1 x Fume Extractor2 x Smoking Pipe2 x Smoking Cover5 x Primary Filter Cotton1 x HEPA Filter 1 x Activated Carbon Filter1x Power Cord1 x Manual

• 99.91% Purification Efficiency: The VEVOR solder fume extractor is equipped with a robust 150W DC motor. The device produces an impressive airflow of 165 CFM, ensuring efficient and effective air purification. The device boasts an exceptional smoke purification rate of 99.91%, ensuring that users can once again enjoy fresh air.
• Advanced 3-stage Filtration System: This solder fume extractor is equipped with a three-layer filtration system, comprising a cotton filter, a central HEPA filter and an activated carbon filter. The pleated design increases the filter area to 2.1m², significantly enhancing the product's filtration capacity.
• Adjustable Speed Control: 3 adjustable speed settings allow you to customise the airflow to meet your specific requirements, ranging from strong to weak. This flexibility allows you to maintain a comfortable working environment, which is essential for increasing productivity.
• Quiet operation: The FL-250 fume extractor is driven by a 150W DC brushless motor, reaching a maximum rotation speed of 4500 RPM while maintaining low noise levels. With sound emissions below 63 dB, it offers a tranquil and fresh working environment.
• Compact and Flexible: It measures just 11 x 11 x 16.9 inches, approximately the size of A4 paper, making it ideal for use in small solder stations and home DIY projects. Its tightly sealed metal latches prevent any leakage, and it is outfitted with four wheels, two of which are lockable, for easy and secure movement.