uxcell 5/8" Dia 1/4" Shank Bottom Cleaning Router Bit, 2 Flutes Carbide Tipped Cutter Uncoated for Woodworking Silver Tone

Specifications:Shank Diameter: 1/4"Cutting Diameter: 5/8"Cutting Depth: 16.5mm / 2/3"Overall Length: 49mm / 1-8/9"Tip Material: Tungsten Steel (Carbide)Shank Material: 45# Carbon SteelFeed Rate (suggested): 8-12m/minSpindle Speed (suggested): 18000-24000rpmPackage Included: 1 x Bottom Cleaning Router BitColor: Silver ToneDescriptions:1. The carbide (tungsten steel) bottom cleaning bits are with sharp cutting edge, high hardness and long life, resulting in nice finishing on woody pieces after cutting.2. Cuts all composition materials, plywood, hardwoods, and softwoods, chipboard, and MDF etc. Great for cleaning up dadoes and grooves. Cannot be used to cut ferrous metal and non wood materials. The larger the tool diameter, the smaller the spindle speed should be.3. Use on hand held router, table router, edge trimmer, CNC and other automatic routers. Be sure to use only router bits and accessories designed for the router. The tool shank should be installed with a clamping depth of at least 1-inch to maintain the proper pressure carrying range.4. Always choose a router bit with a longer cutting edge than the workpiece. For example, use a tool with 1-inch cutting edge length when milling grooves of 1/2-inch depth. (It is NOT recommended that the cutting edge length equal to or less than 1/2-inch).

• Specifications: 5/8" cutting diameter and 1/4" shank bottom cleaning router bits with 16.5mm (2/3") cutting depth. Suitable for wide ranges of applications. Be sure to use only router bits and accessories designed for the router.
• Applications: Cuts all composition materials, plywood, hardwoods, and softwoods, chipboard, and MDF etc. Great for cleaning up dadoes and grooves. Suggested feed rate: 8-12m/min, suggested spindle speed: 18000-24000RPM.
• Features: Carbide (tungsten steel) tip with sharp cutting edge and high hardness, makes smooth and clean surface. Solid hardened steel body for long service life
• Easy to Use: Use on hand held and table router, edge trimmer, CNC and other automatic routers. The tool shank should be installed with a clamping depth of at least 1-inch to maintain the proper pressure carrying range. The larger the tool diameter, the smaller the spindle speed should be.
• Tips: Always choose a router bit with a longer cutting edge than the workpiece. For example, use a tool with 1-inch cutting edge length when milling grooves of 1/2-inch depth. (It is NOT recommended that the cutting edge length equal to or less than 1/2-inch)