uxcell 1/4" Shank T Slot Router Bit 3/8" Cutting Depth with 1/2" to 1/4" Router Collet Adapter, 4 Flute Carbide Tipped Wood Milling Cutter

Specifications:T Slot Router Bit:Shank Diameter: 1/4"; Cutting Depth: 3/8"; Cutting Width: 5/16"; Cutting Diameter: 40mm / 1-4/7"; Overall Length: 48mm / 1-8/9"Tip Material: Cemented Carbide; Shank Material: High Carbon Steel; Surface Treatment: Electrostatic Powder Coating; Color: Green, Silver ToneRouter Collet Adapter:Outer Diameter (OD): 12.7mm / 1/2"; Inner Diameter: 6.35mm / 1/4"; Total Length: 27mm / 1-1/16"Material: Spring Steel; Finish: Black OxidePackage Content: 1pcs x T Slot Router Bit, 1pcs x Router Collet AdapterDescriptions:T Slot Router Bits are widely used for softwoods, hardwoods, chipboard, plywood, acrylic, particle board and MDF etc. Designed to plane the top surface, and also for wood slab flattening, trimming and grooving. Carbide tip with sharp cutting edge, high hardness, wear resistance and long life. Solid hardened steel body with anti-kickback design. Provide good cutting strength and slotting effect to improve efficiency. Use on CNC, woodworking engraving machine, trimming machine, hand-held and table-mounted portable routers. The shank of all bits must be inserted in the collet in full length. Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min; suggested spindle speed: 18000-24000RPM.Router Collet Adapter is made of spring steel for high strength and heat resistance. Black oxide finish for corrosion and wear resistance. Suitable for engraving machine, CNC machine and wood router chuck conversion. Provide precision, tight and stable clamping force for work efficiency. Easy to use. Slide the adapter into your collet and tighten.

• Router Bit Set: 1/4" shank t slot router bit with 3/8" cutting depth, 5/16" cutting width; 1-4/7" cutting diameter. Router collet driver adapter converts 1/2" to 1/4". Great replacement bit tools for woodworking carpenter.
• Applications: Suitable for softwoods, hardwoods, chipboard, plywood, acrylic, particle board and MDF etc. Designed to plane the top surface, and also for wood slab flattening, trimming and grooving.
• Features: Carbide tip with sharp cutting edge, high hardness, wear resistance and long life. Solid hardened steel body with anti-kickback design. Provide good cutting strength and slotting effect.
• Easy to Use: Use on CNC, woodworking engraving machine, trimming machine, hand-held and table-mounted portable routers. Just slide the bit shank into your collet adapter and tighten.
• Notices: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min; suggested spindle speed: 18000-24000RPM