36” Hardwired Power Strip (NO Power Cord), 9 Vertical Outlets (NOT Tamper Resistant), with Ears (with mounting tabs on Both Ends), 15A (NOT a 20 Amp Unit), with USB, White

36" Hardwired Power Strip with USB, 9 Outlets - * NOTE: Measurement is approximate: For installation purpose, the length of the power strip unit does not include ears, (mounting tabs 0.67" / 17mm on each end). For models with ears, 2 x 0.67" / 17mm need to be added to the product length in the dimension listed above; the width does not include the size of screws (min. 0.06" / 1.5mm) on each side; the height (or thickness) does not include the receptacles (Regular Outlets: 0.19" / 4.9mm; TR Outlets: 0.25" / 6.3mm) above the surface of the casing, please consider Adding 0.12″/3mm in Height if Clips are to be used. - SAFETY WARNING: - Installation work of this unit must be done by a professional, a licensed electrician or an electric engineer. - Never install this unit during a thunder storm. - Switch off the power before you start installation work. - This unit is for indoor use only. - This unit is not intended for use in or around wet or potentially wet areas including, but not limited to, aquariums, saunas, showers and fountains.

• 36” / 0.91m Hardwired Power Strip, 9 Vertical (NEMA 5-15R, NOT Tamper Resistant) Outlets, USB, White
• With EARS (mounting tabs) on both Ends, Total Length 37.32” / 948mm
• Measurement: L36″ x W1.61″ x H1.35″ (914 x 41 x 34.4mm); Casing/Outlet Height: 1.16"/0.19" (29.5/4.9mm)
• 2 USB Ports, (Type A) Output DC 5V/2.1A, Input AC 110-240V/0.5A/60Hz
• No Power Cord - Hardwired and to be Mounted at Your Desired Location. Installation Instruction Included
• 125V/15A/60Hz (14/3 AWG Wiring); Recommended Max Load 1440W (This is NOT a 20 Amp Unit)
• ETL Approved and Listed (Conforms to UL 5, UL 1030 and CAN/CSA C22.2 No. 62)
• 6 Easily Punched off Knockouts, 1 on Each Side - (Top/Bottom Cover, Both Sides/Ends)
• Great for Contractors, Electricians and Installers, as well as DIYers