High Torque Clock Movement Mechanism with 18mm (45/64 inch) Shaft Length and 8.19 Inch Long Hands

Installation Steps: 1.Place rubber cushion over shaft. 2.Insert shaft through hole in clock surface 3.Insert shaft through clock face (if appropriate). 4.Place dial plate washer over shaft. 5.Attach dial fixing hex nut. 6.Balance pressing fixed hour hand (Aim at 12 o'clock). 7.Balance pressing fixed minute hand. (Aim at 12 o'clock). 8. Lightly screw minute nut in place.(Go to the next stepwithout this accessory). 9.Press second hand in place (Aim at 12 o'clock).

• Clock Mechanism Parameter: Total shaft length is 18mm (45/64 inch) , thread length is 6mm (15/64 inch), suitable for maxmium clock dial thickness 4mm(5/32 inch) .
• Two Clock Hands Length：Size from the hole center to the tip: The minute hand is approx 208 mm / 8.19 inch long, the hour hand is about 154 mm / 6.06 inch length.
• Clock Parts inclued: 1x high torque quartz clock motor ,1x 6.06 inch hour hand ,1x 8.19 inch long minute hand , 1x metal hook and all necessary mounting accessories.
• Good DIY clock kit: Save money and reduce waste by repairing and replacing broken parts of a clock, this clock hands and motor kit also serves as excellent handwork materials and perfect clock kits for do it yourself.
• Kindly note: Please double-check the size before purchasing. When installing, make sure the hour and minute hands are parallel to each other. Also, please handle with care and avoid applying excessive pressure to prevent bending. Thank you for your understanding!