L Shape 8mm 2-Pin COB LED Strip Connectors Right Angle Corner Clips Solderless Adapter Terminal Extension for 12v 24v Single Color LED Strip Lights

Technical parameters Working Voltage: DC5V, 12V, 24V Rated Current: 5A Pin Quantity: two pins Pin Material: Copper Workable strip: 2pin COB, single color , IP20 non-waterproof led strip Strip Width: 8mm How to use the right angle connector to connect 8 mm wide COB strips? 1. Flip the connector so that the movable cover side is facing out. 2. Hold the corner of the connector with your left hand so that the connector is in an upside down L-shape. 3. Hold the LED strip lights sections with your right hand so that the LED part of the light strip is facing you. 4. First insert the light section through the top entrance of the connector to the bottom. Close the movable clear cover. 5. Then insert the other light section through the other entrance until it is as close to the first light strip as possible. Close the other clear cover to complete the connection. How to use the Right Angle connectors for a normal 8mm width SMD 3528 light strip? 1. Refer to steps 1 to 3 of the COB strips installation above. 2. Insert two 3528 light strip sections into the ends of the connector so that the PIN of the connector is aligned with the two solder points on the light strip. 3. Close the transparent cover to complete the connection. If you have any problem about installation, pls feel free to contact us. Package: 10pcs 2-Pin L shape connectors BM8BBL-2

• Seamless connection for COB strips. No soldering, insert the 8mm width strip into both ends of Biantie La 2-pin connector and close the cover by hand without any other tools to achieve a seamless connection of COB strips.
• 8mm L shape connector.These right angle connectors of Biantie La are not only suitable for seamless connection of COB strips, but also for corner connection of regular 2-pin IP20 non-waterproof strips, such as SMD2835, 3528, 5v, 12v, 24v and other single color strips. But it does not match 5mm, 10mm, 12mm width LED strips. CCT adjustable, RGB LED strips.
• Easy to open and reusable. Without tools, you can open the clip with your fingernail, align the light source side of the strip with the connector pins, and then close the transparent cover for a stable and good connection. It effectively solves the problem that other connectors cannot be opened or are difficult to reuse.
• Ultra-thin design. Easier to hide in the aluminum profile. Unlike traditional right angle connectors, the L-shaped connectors of BM series can connect two sections of COB tapes without gaps to form a near-continuous complete beam with no obvious dark areas.
• Safe and reliable connection. The ends of the connector pins pierce into the two solder joints of the LED strip, achieving a stable and reliable connection. It is more intuitive and has a higher one-time success rate than previous light strip connectors.