ATB- 100 Pack Outdoor Indoor LED Strip Light Mounting Bracket Fixing Clips, One Side Clips with 102 Pieces Screws, Ideal for 10mm and 12mm Width Silicone Tube IP67 Waterproof Strip, Clear

ATB-WL00410 light strip clips for 10mm/12mm wide IP67 waterproof led strip lights, which are upgrading designed,Repalce traditional two screws clips, soft silicone clips. Compared with traditional LED Strip mounting clips have follow advantage: 1. One-side screw can reduce the installation time and difficulty. And, the led strip light can be installed on a narrow surface and more closer to the edge of the surface. 2. Widen the press area between the clips and the light strip, so the clips ensure the levelness and can press the strip light more tightly. 3. Hollow height only 3.5mm/0.138inch (old one is 4.0mm). The tightness can be controlled by twisting the screw as required. 4. Pure PC transparent: light transmittance from 86% increase to 98% ,more easy to hide in plain sight,while ensuring that thebrightness and color temperature of the light remain unchanged. Note: Before buying light hanger clips, please kindly check up your led strip width and height. 1.Suit for 10mm/0.39 inch and 12mm/0.48 inch IP67 silicone tube led strip light which is DC12V/24V input.The sealing height of the IP67 Silicone tube are not higher than 3.8mm/0.14 inch.(Silicone seal is elastic),The number and type of LED beads do not affect the use. 2.Don't fit for IP20/IP44/IP65 led strip light and. Installation: 1.Before installing the clips. Please use drill tools punch holes in cement wall/tile wall/thick metal surface and make the markings. For wood/thin metal surface no need puch holes in advance. 2.Putting screws through the clips and then fixed the screw in the marked mounting holes. 3.Adjust led strip and tighten the screw until the clip completely hold the light strip. 4.Check and good job. suggest 3-5 pieces clips within 1 meter strip lights. Package Including:100pcs clips and 102pcs screws

• Simple Installation Design: Designed for screwing Silicone Tube IP67 Waterproof LED light strips within 12 mm/0.48in width into wood, plastic board, metal or cement wall, such as Cabinet, wardrobe, guardrail, Eaves, Garden, Carriage, etc
• Clear Design and High Quality Material: High light transmittance and no damage to your leds color temperature. Durable plastic with UV resistant material, suitable for indoor and outdoor use without change to yellow for a long time
• One Side Fixing System: Easy to arrange the light strip and maintain. Recommended to use 3-5 pieces clips for 1 meter LED strip light, will be stronger and will not fall easily. Reduces installation time significantly
• Magnetic Screws Included: Rust-proof and 80 degree hardness suit for wood, plastic board, metal, cement wall and other surfaces
• Compatible Strip Width: Specifically designed to fit 10mm and 12mm width Silicone Tube IP67 Waterproof LED strip lights with sealing height not higher than 3.8mm
• Complete Package Contents: Package including 100 PCS Transparent Clips and 102 PCS Magnetic Screws. The Light Clips can be applied to -30 to 90 degree working temperature, and can be stored at room temperature for Long Time