JINGLING 4.5" inch 110mm Diamond Lapidary Saw Blade Thin Rim 0.4 Arbor 5/8" Jewelry Tools for Stone Pack of 10Pcs

JINGLING 10Pcs 4.5" inch 110mm Super-Thin Diamond Lapidary Saw Blade Cutting Disc Rim 0.4mm for Jewelry Gems Code 110*0.3*16mm Product Specification: Product Name: lapidary saw blades, 4.5 diamond cutting discs, gem cutting saw, lapidary trim saw Outside Diameter : 4.5" (110mm) Arbor hole : 5/8"(16mm) Can be used on 1/2"(12.7mm) with a bushing Core thickness: 0.014"(0.36mm) Rim thickness: 0.016" (0.4 mm) on the edge where the diamond is Quantity: 10 Pcs Recommend RPM: 3820 RPM Product Description: Exclusively designed for processing materials for softer high value rocks like turquoise, gaspeite, opals These blades are manufactured by crimping Synthetic diamonds directly into the edge of the saw blade. They are best suited for turquoise, opal, glass, and stones in the 4-6 range on the Mohs hardness scale We don't recommend using this blade to cut too hard materials, such as: agate and jadeite with a Morse hardness of 6-7. Because it is difficult to cut or the blade will be damaged quickly Advantages: achieving satisfactory cutting results and reducing unnecessary material consumption This thin diamond lapidary saw blade offers a very good cost effective option for those that want either very thin kerfs or plan on short term use Used for Trimming: They are excellent for trimming small shapes into stones This simply means that these blades are meant for small material, not large or slabbing techniques These blades operate in a single direction so make sure that the arrow on the blade is pointed towards you when mounting Use with water as a lubricant New, Unused Blade - Not in Original Packaging These blades were originally packaged in oil so you will see several oil spots on the surface

• Product Name: lapidary saw blades, 4.5 diamond cutting discs, gem cutting saw, lapidary trim saw
• Outer Diameter : 4.5" (110mm); Arbor hole: 5/8"(16mm); Core thickness:0.014"(0.36mm)
• Designed for processing materials for softer high value rocks like turquoise, gaspeite, opals
• Advantages: achieving satisfactory cutting results and reducing unnecessary material consumption
• Very good cost effective option for those that want either very thin kerfs or plan on short term use