E-Z Lok Threaded Inserts For Metal; Assortment Kit; Carbon Steel; Metric Internal Threads, M3-0.5, M4-0.7, M5-0.8, M6-1.0, M8-1.25; 50 pieces

The E-Z LOK threaded inserts kit for metal is a 50-piece set of solid, heavy wall, carbon steel, self-locking, metric coarse thread inserts for use in metal, packaged in a case with a compartment for each of five different sizes: M3-0.5, M4-0.7, M5-0.8, M6-1.0, and M8-1.25. These inserts are self-locking, with pre-applied Loctite on the external threads that is ready to use in 3-5 minutes and seals against liquids and gases to 6,000 psi when fully cured (72 hours after installation). They fit holes made with standard drill and tap tools, and install with a flathead screwdriver or bolt and jam nut (installation hardware sold separately). The inserts are made of American Iron and Steel Institute (AISI) 12L14 carbon steel, which is cold drawn for better tolerance and strength than hot rolled steel. This steel has a Rockwell hardness of B84 and an ultimate tensile strength of 78,300 psi. Specifications Quantity of Inserts Insert Part Number Internal Thread External Thread Length Tap Drill Size Tap Size Min. Full Thread Depth 10 450-3 M3-0.5 M6-1.0 6.5mm 5.1mm M6-1.0 7.8mm 10 450-4 M4-0.7 M8-1.25 7.5mm 6.9mm M8-1.25 9.0mm 10 450-5 M5-0.8 M8-1.25 7.5mm 6.9mm M8-1.25 9.0mm 10 450-6 M6-1.0 M10-1.5 10.5mm 8.6mm M10-1.5 12.0mm 10 450-8 M8-1.25 M12-1.75 12.5mm 10.4mm M12-1.75 14.5mm Externally threaded inserts are used to repair a hole with stripped threads, or to install a new threaded hole. The hole must be tapped to the correct size, then the insert is installed; it is anchored by an adhesive or locking elements. E-Z Lok manufactures threaded inserts for use with metal, plastic, and wood. The company, founded in 1956, is headquartered in Gardena, CA.

• THREADED INSERTS FOR METAL – E-Z LOK Threaded Insert Assortment Kit for metal. Threaded inserts for putting strong, machine threads in metal.
• QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair kit.
• AVAILABLE OPTIONS – Kit is available in carbon steel threaded inserts and stainless steel threaded inserts that are easy to install with standard tools.
• FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc.
• STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool.