Parts & Accessories KK2.1.5 LCD Flight Control Board V1.19S1 PRO Self-Balancing Programmer FC for RC Airplane FPV Racing Drone DIY 1520us - (Color: Flight Control)

KK2.1.5 LCD Flight Control Board V1.19S1 PRO Self-balancing Programmer FC for RC Airplane FPV Racing Drone DIYPlease note whether the firmware is V1.19S1 pro or OpenAeroVTOL.Oe we just send V1.19S1 pro for you.Descriptions:Item number: KK2.1.5Size: 51mm x 51mm x 12mmWeight: 21 gram (Inc Piezo buzzer)IC: AtmegaGyro/Acc: InvenSense Inc.Auto-level: YesInput Voltage: 4.8-6.0VAVR interface: standard 6 pinSignal from Receiver: 1520us (5 channels)Signal to ESC: 1520usFirmware Version: 1.17S1 PRO OR OpenAero VTOL (Pre-installed firmware)Applicable models:DualcopterTricopterY6Quadcopter +Quadcopter XHexcopter +Hexcopter XOctocopter +Octocopter XX8 +X8 XH8H6V8V6Aero 1S AileronAero 2S AileronFlying WingSinglecopter 2M 2SSinglecopter 1M 4SAll Settings and adjustments are made via the LCD screen and the four buttons below. No computer is required. Unless you are upgrading the firmware.All items contained in this product are as follows:KK2.15 itself has a self-balancing mode, in which the transmitter rocker is released when the attitude is tilted in the air, and the aircraft returns to the level by itself. In the past, the firmware of the old version must be entered by dialing the fifth channel switch. That is to say, either fly in the stunt mode or fly in the self-balancing mode. The best thing about 1.6++ is that the two modes are merged. When the joystick is near the neutral position, it is the self-balancing mode. When the joystick is large, it is the trick mode, and no longer need the emergency switch!Note: The left and right wirings are all white signal lines facing the LCD screen, and the black ground lines are facing the outside of the board. Do not connect wrongly!In addition, the “BUZZER” in the upper left corner is connected to the buzzer. After connecti

• Color: Flight Control
• Item number: KK2.1.5
• Size: 51mm x 51mm x 12mm
• Weight: 21 gram (Inc Piezo buzzer)
• IC: Atmega