MECCANIXITY 5Pcs RC M1 Motor Pinion Gear 5mm Shaft 13T/14T/15T/16T/17T Hardened Pinion Gears Carbon Steel for 1/8 RC Model Car Boat Drone

What is this?The RC Hardened Gear is commonly used in remote control (RC) models, such as RC cars, trucks, boats, and drones. It is used to transfer rotational motion from the motor to other components, such as the drive shaft or spur gear, allowing the model to move forward or backward.What will I get?Gear Pitch: M1Number of Teeth: 13T/14T/15T/16T/17TInner Diameter: 5mm/0.2 inchDiameter: 15mm/0.59 inch, 16mm/0.63 inch, 17mm/0.67 inch, 18mm/0.71 inch, 19mm/0.75 inchHeight: 14mm/0.55 inchMaterial: Carbon SteelIn the package of: 5pcs x Hardened Motor Gear, 1pcs for each size; 5pcs x Screws, 1pcs x 2mm WrenchAre there any advantages of the product?The pinion gear is made of carbon steel, which has high hardness and can effectively resist deformation.It provides smoother and more efficient power transfer from the motor, resulting in improved acceleration and top speed.How to use it?Steps of installation: 1. Slide the RC Hardened Pinion Gear onto the motor shaft; 2. Align the teeth with the corresponding gears it will mesh with (such as the spur gear); 3. Ensure that the gear is securely seated on the shaft.What should I notice?Please check if your spur gear and pinion gear have the same pitch, otherwise the teeth won't mesh.

• The RC Hardened Gear is commonly used in remote control (RC) models, such as RC cars, trucks, boats, and drones. It is used to transfer rotational motion from the motor to other components, such as the drive shaft or spur gear, allowing the model to move forward or backward.
• Number of Teeth: 13T/14T/15T/16T/17T; Inner Diameter: 5mm/0.2 inch; Diameter: 15mm/0.59 inch, 16mm/0.63 inch, 17mm/0.67 inch, 18mm/0.71 inch, 19mm/0.75 inch; Height: 14mm/0.55 inch
• The pinion gear is made of carbon steel, which has high hardness and can effectively resist deformation. It provides smoother and more efficient power transfer from the motor, resulting in improved acceleration and top speed.
• Steps of installation: 1. Slide the RC Hardened Pinion Gear onto the motor shaft; 2. Align the teeth with the corresponding gears it will mesh with (such as the spur gear); 3. Ensure that the gear is securely seated on the shaft.
• Please check if your spur gear and pinion gear have the same pitch, otherwise the teeth won't mesh.