Rubi Delta Levelling – Pack of 200 Cable Ties (3 – 12 mm)

Original Rubi Delta leveling on top of system for the levelling of tiles when setting. - with this system lets you Tile perfectly, ready to plan to install./; Upper Teeth/are reliably can be avoided. The application is quick and easy. You saves you time receives a great verlegten soil, with low cost and maintenance. The system can be used both on the floor and on the wall.; proves to be especially advantageous with big format and calibrated tiles.; with this-Levelling System relocated surfaces tiles can withstand also a critical tested by your customers. How it works - The Pull Tabs are used in the wiring in joints (joint width min. 2 mm). Dishwasher safe after inserting the neighbouring Tile turn the wedge 10, special pliers thanks to the flap, until the surface of both view over the time.; distance holder can also be used.; to the glue to be erhrten, the tab on the pre-determined Breakaway point Easy Broken.; the wedges can be used again and again.; the straps are after Ausfugen no longer visible. Suitable for all formats, plate thickness from 3 to 12 mm., including natural stone. Bring you volumes of per m:, Pack of 6 in the format 120 x 120 cm; of 8 at format 120 x 60 cm; of 8 at format 100 x 100 cm With 7 pcs at format 90 x 90 cm; 9 St at format 90 x 60 cm; 11 St in format 60 x 60 cm, of 25 in the format 40 x 40 cm

• Different thicknesses, to install in 1 mm, 1.5 mm, 2 mm and 3 mm, and at different heights, to work with tiles in various thickness: 3 – 12 mm, 5 – 15 mm OR 11 – 20 mm
• The design of the cable ties ensure that when the pressure leveling Only Get The Highest PC, minimizing the formation of air bubbles in the skin
• Allows for removal by Impact (kick or mallet, should be always in the sense of the board of placement